Competitions
Use this 10-cell, 12-volt rechargeable pack to bring long-lasting power to TETRIX® motors and electronics. This 3,000 mAh NiMH pack features a built-in, 20-amp replaceable fuse for safety.
(THIS BATTERY IS FTC LEGAL)
The CIM motor is a tried and true FIRST Robotics Competition workhorse motor. This brushed DC motor is 2.5 inches in diameter and kicks out 337 watts of power.
Pinion Options:
The CIM motor shaft is 0.313 in. (8 mm) in diameter and 1.25 inches long. It features a 2 mm wide machine key slot allowing installation of any number of custom or off the shelf pinions such as those included with all of our CIM based gearboxes. Other options include a pre-attached 16 tooth pinion making the CIM ready to mate to a CIM Sport planetary gearbox or a pre-attached 15 tooth pinion preparing the CIM for an EVO Gearbox. Use either of these two options if you are planning on using either the CIM Sport or an EVO gearbox and don't want to install the press fit pinion yourself. All of our other CIM based gearboxes use a slip fit pinion & machine key and are easy for the end user to install.
Compatible Components:
Motor Etching
CENTERSTAGE℠ Presented by Raytheon Technologies is the 2023-2024 FIRST® Tech Challenge game. Teams will raise the curtain on the power of design, creativity, and precision to create all new experiences. Read more about CENTERSTAGE℠ on the FIRST® website.Game Sets will ship beginning the week after 2023-2024 FTC Kickoff.
CENTERSTAGE℠ Presented by Raytheon Technologies is the 2023-2024 FIRST® Tech Challenge game. Teams will raise the curtain on the power of design, creativity, and precision to create all new experiences. Read more about CENTERSTAGE℠ on the FIRST® website.Game
This Tape Set includes all the tape you need for the 2023-2024 FIRST Tech Challenge game, CENTERSTAGE℠ presented by Raytheon Technologies.
We also offer a CENTERSTAGE℠ Tool Set.
Components in am-5100_tape:
This Tool Set includes everything you need to assemble the 2023-2024 FIRST Tech Challenge game, CENTERSTAGE℠ presented by Raytheon Technologies.
We also offer a CENTERSTAGE℠ Tape Set.
Components in am-5100_tool:
The FTC Drive Base Kit v2 (70400-v2) is an upgrade from our first version (part # 70400). It includes our new slim mecanum wheels with bearings on all rollers, allowing you to make a wider base robot. It also has 4 NeveRest Orbital 20 Gearmotors with encoder cables, the new Clamping Shaft Hubs, 4 bumpers and complete hardware to complete the chassis.
This is the Rope used in the AndyMark Climber in a Box. With a tensile strength of 2,500 lbs and a 1/8 in. thickness, this rope is perfect for an FRC elevator or winch system (or whatever else you find it to be useful for. It's a strong rope. You can do a lot with it.
The Powerpole Extension Cable is 50cm long and 14AWG wire gauge to handle heavier loads.
· 450mm Length
· 3 position
· TJC8 MH-FC on one end
· TJC8 FH-MC on the other end
· Twisted cable
· Colors: White, Red, Black (red in middle)
· 24AWG Guage
The Studica Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Closed length is 288m, with a 180mm stroke, creating a 470mm extended length.
IN STOCK
The Studica Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Closed length is 384m, with a 240mm stroke, creating a 530mm extended length.
IN STOCK
The Studica Linear Servo RC Actuator 140S-190N is a new Servo motor which has a stroke of 140mm and a max force of 190N. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.
The Studica Linear Servo RC Actuator 140S-95N is a new Servo motor which has a stroke of 140mm and a max force of 95N. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.
The Studica Linear Servo RC Actuator 50S-190N is a new Servo motor which has a stroke of 50mm and a max force of 190N. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.
The Studica Linear Servo RC Actuator 50S-95N is a new Servo motor which has a stroke of 50mm and a max force of 95N. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.