Competitions
Competitions
FIRST Tech Challenge Premium Accessory Set
Here you can get all the components needed to setup the entire FTC perimeter. Save a bit of money and buy it as one package instead of each piece separately, carrying bags included!
1/4-20 x 3 in. Socket Head Cap Screw
1/4-20 x 3" Long Socket Head Cap Screw
Specifications:
- Material: Steel
- Coating: Zinc plated
- Thread: 1/4-20
- Length: 3 inch
- Head: Socket Head Cap Screw
- Weight: 0.426 pounds
Battery Beak for FIRST Tech Challenge Batteries
This version of the Battery Beak is designed with FIRST Tech Challenge teams in mind. When you order this version, your Battery Beak will arrive configured for the 12V 3Ah NiMH batteries used in FIRST Tech Challenge. You will also receive the new SB-50A to Tamiya and PowerPole cable necessary to connect to your batteries, whether you left them stock or converted them to PowerPole connectors.
Note: Do not use both the Tamiya and PowerPole connectors at the same time. It will form a complete circuit, which could damage your batteries.
Included Hardware:
- One - FIRST Tech Challenge Battery Configured Battery Beak (am-3427)
- One - Tamiya/ Power Pole Adapter (am-2070a)
Documents
Guide(s)
The Thrifty Hub - Half Inch Hex - QTY 4
Half inch hex hubs are often used to transfer motion between components in competition robots. This hub includes a thicker quarter inch flange that allows for tapping 10-24 / 10-32 holes or drilling and tapping to 1/4-20 sized holes. The Thrifty Hub is offered as a blank hex hub to teams to do further machining or leave stock as-is.
#10-32 x 1.5" SHCS - Min 25
Statistics:
- Material: Steel
- Coating: Zinc plated
- Thread: #10-32
- Length: 1-1/2 inch
- Head: Socket Head Cap Screw
1/4-20 Nylock Nut
Specifications:
- Material: Steel
- Coating: Zinc plated
- Thread: 1/4-20
- Width across hex: 7/16"
Top Corner Bracket
These plates are included in the 2024 KitBot. Made from 0.125 in. Aluminum, these Plates are used for various structures throughout the KitBot.
Quantity of each plate included in the 2024 KitBot:
- 2 - Top Corner Bracket (am-5294)
- 2 - Tube Mounting Plate (am-5296)
- 1 - Motor Mount Plate (am-5295)
Specifications
- Material: Aluminum
- Thickness: 0.125 in.
Motor Mount Plates
These plates are included in the 2024 KitBot. Made from 0.125 in. Aluminum, these Plates are used for various structures throughout the KitBot.
Quantity of each plate included in the 2024 KitBot:
- 2 - Top Corner Bracket (am-5294)
- 2 - Tube Mounting Plate (am-5296)
- 1 - Motor Mount Plate (am-5295)
Specifications
- Material: Aluminum
- Thickness: 0.125 in.
Documents
CAD File(s)
am-5294 KitBot 2024 Top Corner Bracket.STEP
NeveRest Orbital Gearmotor (Gear Ratio: 50.9 to 1) JST-VH-2 Connector
The NeveRest Orbital gearmotor is a robust planetary gearmotor designed for FTC. With many ratios to choose from you can find the right motor for you, from a fast spinning intake to a high reduction arm, all are possible with NeveRest Orbitals. They have a pre-installed encoder and an output shaft directly in the center of the output face. The shaft is a 6 mm D and the gearbox housing is 37 mm in diameter.
NeveRest Orbital Gearmotor (Gear Ratio: 50.9 to 1) PP45 Connector
The NeveRest Orbital gearmotor is a robust planetary gearmotor designed for FTC. With many ratios to choose from you can find the right motor for you, from a fast spinning intake to a high reduction arm, all are possible with NeveRest Orbitals. They have a pre-installed encoder and an output shaft directly in the center of the output face. The shaft is a 6 mm D and the gearbox housing is 37 mm in diameter.
Tube Mounting Plate
These plates are included in the 2024 KitBot. Made from 0.125 in. Aluminum, these Plates are used for various structures throughout the KitBot.
Quantity of each plate included in the 2024 KitBot:
- 2 - Top Corner Bracket (am-5294)
- 2 - Tube Mounting Plate (am-5296)
- 1 - Motor Mount Plate (am-5295)
Specifications
- Material: Aluminum
- Thickness: 0.125 in.
Documents
CAD File(s)
am-5294 KitBot 2024 Top Corner Bracket.STEP
am-5295 KitBot 2024 Motor Mount Plate.STEP
am-5296 KitBot 2024 Tube Mounting Plate.STEP
1 in. 8 mm to 1/2 in. Hex Shaft Adapter
This adapter converts an 8 mm keyed shaft to 1/2 in. hex. The keyway is 2 mm wide. This allows you to adapt the output of a motor or gearbox like the CIM Motor (am-0255) to any of our hubs or wheels with a 1/2 in. hex bore. You'll need a 2 mm machine key (am-1121) to complete the assembly and transmit torque from the motor.
This adapter is no longer available in the 0.75 in. length.
Specifications
- Bore: 8 mm Round
- Keyway Width: 2 mm
- Length: 0.5 in., 1 in.
- Material: Steel
- Weight: 0.03 lbs
- Width: 0.497 - 0.499 in.
Sealed 4" OD x 3.5" ID x .25" X-Contact Bearing
This is a 4" outer diameter X-contact bearing that is sealed on BOTH sides of the bearing with a rubber seal. This type of bearing is for teams who want to keep field debris out of their typical non-shielded x-contact bearings.
Dimensions are 4" OD x 3.5" ID x .25" thick.
Weight is 2.72 ounces or .17 lbs.
#10-32 x 0.625" SHCS - Min 25
Specifications:
- Material: Steel
- Coating: Zinc plated
- Thread: 10-32
- Length: 5/8 inch
- Head: Socket Head Cap Screw
- Yellow Nylon Thread Lock Patch
Spline to 1/2" Hex Adapter - QTY 4
Use this 1 inch long adapter to directly drive 1/2" hex products from a spline shaft motor. Sold in packs of 4.
Includes rounded edges allowing it to interface with 13.75mm ID bearings or 1/2" ID hex bearings.
Made from 4140 Steel.
Weight: .041 lbs