Studica Robotics
The 38mm Omni Wheel was designed as an odometry wheel that can fit inside most channel sizes. For ease of use, three cores were designed to fit 6mm D-Shaft, 5mm Hex Shaft, and 7mm Hex Shaft. The wheel is open for easy use in any ecosystem with the provided different-sized cores.
Specifications:
Includes,
The Studica U Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
Specifications:
The Studica Face Bearing Block can be mounted on any Studica channel and bracket providing which will allow for a 6mm ID through hole for 6mm shafts (axles). It has a permanently installed Standard Sealed Bearing. Has 8 x M3 tapped through holes for easy mounting.
iCrimp Ferrule Crimping Tool Kit, AWG 23-10 Self-adjustable Ratchet Ferrule Crimper Plier c/w 770End Sleeve Ferrules Connector Terminals
The Intake Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Used with the Silicone Rubber Tubing #76410
Specifications:
The Studica Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Closed length is 384m, with a 240mm stroke, creating a 530mm extended length.
IN STOCK
The Lyon Challenge Elements will be used in the WorldSkills Lyon 2024 Mobile Robotics Competition. More details will be provided in the official Test Project (TP) (to be released).
Spare sets screws for Studica Gears Including:
76219 - 30 Tooth Bevel Gear
10 Pack CONE HEX SOCKET SET SCREW DIN 914 M4 Thread
Rubber Grommets are made for the Studica channel and plates and or any structure with a 14mm hole. Use it for protecting wire or as a bumper.
Specifications:
The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.
Specifcations:
The Shanghai Gurney includes the following items,
1 | 192mm x 96mm Flat Bracket | 76066 |
2 | L Bracket (2 pack) | 76087-2 |
2 | 6mm x 140mm D-Shaft | 76164 |
4 | Bronze Bushing 6mm ID x 14mm OD | 76301 |
4 | 75mm Drive Wheel - 60A, 12.5mm wide, 1/2" Inner Hex, Black | 76271 |
1 | Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (4) | 76305 |
1 | 6mm Shaft Hub (4 pack) | 76284-4 |
1 | M3 Kep Nut (pack of 100) | 76204-100 |
1 | M3 x 10mm Socket Head Cap Screw (pack of 100) | 76201-100 |
The VMX Battery Adapter cable connects a VMX-pi power connectcor to an external battery supply.
Detailed Specifications:
Includes two 5mm Bore, 10 Tooth Aluminum Pulleys and one 1M XL Timing belt
GT2 Pulley
Φ22.0mm*13.0mm thick
2*M4 thread for M4 set screws
Φ6.0mm D hole
AL6061-T6
The 125mm All-Terrain Wheel Set includes two left and two right rubber wheels. They have a foam core and therefore do not require air. They grip well on smooth, hard surfaces and are perfect for travel on uneven surfaces where you may have mulch, sand, dirt, or gravel. They are designed and manufactured by Studica to work with the Studica Robotics Building platform and other building sets. The All-Terrain wheels have been tested up to 40kg (88 lbs) using all four wheels.
Specifications,
The Studica L-Beam is available in 9 different lengths from 48mm to 432mm. It is strong while light weight. It can be easily cut to your own custom size. The hole pattern matches the hole patterns in the Studica U-Channel, Low Profile U-Channel, and the various plates.
Specifcations,