Everyone's Robot is different, this lets you customize the wire gauge, jacket type and lengths of your Robot Side Power Cable designed to connect a Power Distribution Panel mounted on your robot to a battery via a battery cable (6AWG, 6AWG Custom, or 4AWG), It includes a 120A Breaker.(depending on availability it might be am-0282 or am-0282a)
PLEASE CONTACT US FOR A QUOTE ON CUSTOM CABLES
All wire connections are crimped with a 6-ton pneumatic crimping tool to ensure they are never the failure point.
How to Customize:
1. Select your Cable Gauge, Type, and SB Connector
- 6 AWG PVC Jacket with SB50
- 6 AWG Flex EPDM Jacket with SB50
- 4 AWG Flex EPDM Jacket with SB120
2. Select the overall cable length, which does not included the SB Connector
(12 inches to 36 inches in 2 inch increments)
3. Select the length between the SB Connector and the 120A Breaker on the red wire side.
(5 in to 29 in - available in 2 inch increments)
4. The length of the individual red cable will be calculated automatically to make the ring terminal connections the same distance from the APP.
Note: Lengths are +/- 0.5 in.
Competition Tip: Remember, as the cable length increases, so does the internal resistance of the overall system. This creates a voltage drop that means less power going to your motors and control system. For best results, you'll want to keep this cable as short as your design allows safely.
Documents
