Robot Power Cable, 36 in Long 6 AWG Flex EPDM Jacket With SB40

Be the first to review this product

6 AWG Flex EPDM Jacket with SB50

Overall Length of Cable - 36 Inches

Length Between SB Connector and 120A Breaker - 29 Inches

MFR Part #: am-4481_B36R29

$120.00

Availability: 3 in stock

Qty:

Specifications
Reviews

Everyone's Robot is different, this lets you customize the wire gauge, jacket type and lengths of your Robot Side Power Cable designed to connect a Power Distribution Panel mounted on your robot to a battery via a battery cable (6AWG, 6AWG Custom, or 4AWG), It includes a 120A Breaker.(depending on availability it might be am-0282 or am-0282a)

All wire connections are crimped with a 6-ton pneumatic crimping tool to ensure they are never the failure point.

Note: Lengths are +/- 0.5 in.

Competition Tip: Remember, as the cable length increases, so does the internal resistance of the overall system. This creates a voltage drop that means less power going to your motors and control system. For best results, you'll want to keep this cable as short as your design allows safely.

Write your own review

Product can be reviewed only after purchasing it
Only registered users can write reviews

Review title:

Review text:

Rating:

Bad
Excellent

Also Purchased

SPARK MAX CAN Cable (2 Pack)

#am-4472

$9.40

(10 In stock)

This version of the SPARK MAX CAN Cable bridges the H and L signals together. By doing this within the cable itself, the CAN Bus is less likely to break in disconnection from the SPARK MAX Motor Controller. One end is the JST-PH 4-pin connector, with the other splitting to one male and one female 0.1 in. 3-pin PWN. The CAN High is on the yellow wire and the CAN Low is on the green wire.