10 Feet - Red 4 AWG Flexible Silicone Jacketed Wire

Looking to expand your robot battery cables? Well 4 AWG just may be the answer for you. The larger wire gauge provides less resistance and therefore can prolong your battery life. Just hooking up cable straight to a battery is not recommended, which is where this connector kit comes in. This SB120 Connector handles 48V and provides a quick connect and disconnect from battery to robot.

Specifications

• Gauge: 4 AWG
• Material: Red Plastic, Copper
• Weight: 0.2 lbs

This black 4 AWG wire is silicone jacketed, making it incredibly flexible and a great choice for your FRC robot's batteries.

Comes in spools of 10 feet each. This wire consists of .08mm tinned copper with a strand count of 5000.

This bonded black and red 18 AWG wire is silicone jacketed, making it incredibly flexible and a great choice for your FRC robot's compressor.

Comes in spools of 25 feet each. This wire consists of .08mm tinned copper with a strand count of 150. Spool weight is .43 pounds.

This bonded wire cleanly separates and leaves no residue on the opposite wire when split.

This is a 1.5" thick 45A durometer urethane wheel with a half inch hex bore. Great for accelerating game objects or for when low compression is desired. 4 inch outer diameter.

This bonded black and red 12 AWG wire is silicone jacketed, making it incredibly flexible and a great choice for your FRC robot's motors.

Comes in spools of 50 feet each. This wire consists of .08mm tinned copper with a strand count of 680. Spool weight is 3.4 pounds.

This bonded wire cleanly separates and leaves no residue on the opposite wire when split.

These bearing options are perfect for supporting spline shafts. The bearings slide on easily in our testing.

Flanged version: 35mm ID x 47mm OD x 7mm overall width - 1.5mm thick flange - .070 lbs

Radial version: 35mm ID x 47mm OD x 7mm overall width - .065 lbs

Comes in both radial and flanged versions.

The MK ES17-12, 12 Volt, 18 amp-hour sealed lead acid battery with nut and bolt connector has proven to be a trustworthy power source for many FIRST Robotics Competition robots. 

The batteries will be packed within a 7"x7"x7" box (aka: interior box). A 3/4" layer of closed-cell foam will be packed around the interior box, within a 9"x9"x9" box. The entire weight of this double box packing assembly will be approximately 29 pounds.

Two (2) batteries are shipped within one box for this price.

This is a kit of loose components to get you from the start line to finish line on at least three of your projects. Powerpoles PP45 housings in white black and red at a whopping 100 count of each and 300 contacts are included in this bundle.

The contacts are rated for 45 amps, and sized for 10-12 gauge wire.