Shopping cart

Filters

Personal menu

Preferences

TileRunner - BullDozer

This is a 6-wheel drive base designed especially for the FIRST Tech Challenge community. We took many lessons from building championship-winning drive systems and adapted it for a robust drive system that integrates well with FTC teams' existing stockpiles.

The foundation of this drive base is a set of 0.090 inch thick aluminum components that provide a sturdy structure to build on. All of the holes in the sheet metal are on a global 16mm pattern, which integrates nicely with many structure components already on the market for FIRST Tech Challenge teams. The included plastic bellypan increases the rigidity of the frame and provides ample mounting options for your electronics. The TileRunner features high traction 4" Stealth Wheels, NeveRest 40 motors and PicoBox Gearboxes with multiple gearing options. Strong 9mm HTD belts drive the outer wheels, while the center wheel on each side is direct-driven for a compact, failure-tolerant drive system. The new AndyMark Nub is used throughout the TileRunner, providing a robust D-bore interface that greatly improves torque transmission compared to standard set-screw hubs.

Note: This product ships as an unassembled kit of parts.

MFR Part #: am-3437_BD

$844.09

Availability: In stock

Qty:

Specifications
Reviews

Gear Ratios
The kit comes with 3 different gear ratio options, so that you can experiment and understand how changing the gear ratio affects the driving performance of the TileRunner.

45 Tooth and 35 Tooth gear combination yields a 1:0.78 over drive
Two 40 Tooth gears yield a 1:1 ratio
35 Tooth and 45 Tooth gear combination yields a 1:1.28 reduction

TileRunner Variations to Suit Your Needs
The TileRunner has a huge variety of possible configurations. The Stealth wheels can be swapped with higher traction (softer) variants, the PicoBoxes can be mounted at either end instead of the standard location in the middle. The Peanut and Churro cross members can also be moved into a number of alternate locations to best suit your robot's needs. Upgrade kits are available to set up the chassis for running the 4 inch SD mecanum wheels, or a set of omni wheels to give the robot many potential driving modes.

To help robot builders achieve their goals and avoid unnecessary part, TileRunner is available in several variations. These add and subtract parts from the standard TileRunner kit as follows:

TileRunner GT (am-3437_gt): For increased maneuverability, this version substitutes NeveRest 40 gearmotors (am-2964a) and black 4" Stealth Wheels (am-2648_Blk) with higher grip than stock.
TileRunner BullDozer (am-3437_bd): When you want to push, pick this! NeveRest 60 gearmotors (am-3103) provide maximum torque, while six of our softest compound blue 4" Stealth Wheels (am-2648_Blue) put that to the ground for maximum pushing force. Pushing hard will increase wear on these wheels, so have a spare set handy for competition time.
TileRunner Mecanum (am-3437_mec): Get set to strafe with four PicoBox Unos replacing the two PicoBox Duos of the standard TileRunner. You'll receive four 4" standard-duty mecanum wheels (am-2538) instead of Stealth Wheels, as well as all the spacers, shafts, and gears to get you up and running.
TileRunner Omni (am-3437_omni): 6WD with omniwheels at the corners is a popular choice among FIRST Tech Challenge teams. Instead of the standard Stealth Wheels, this variation includes two black 4" stealth wheels (am-2648_Blk), four 4" aluminum omniwheels (am-2948), and the necessary hardware.
TileRunner Hulk (am-3437_hulk): The TileRunner Hulk is your go-to for heavy robots! Six 4" Performance Wheels (am-3434) and a 10' roll of our Green Grippy Tread (am-2611) replace the Stealth Wheels and provide a very robust drive system.
TileRunner - No Wheels or Gearmotors (am-3297): Already stocked up on wheels and our NeveRest motors? No worries, this version omits them. You'll still receive the PicoBox Duo gearboxes and all the motion and structure components of the standard TileRunner.

See the Upgrades page if you already have a TileRunner.

Specifications:

Shipping Box Size estimate: 12" x 19" x 3.25"
Weight (TileRunner, with wheels and gearmotors): ~ 11.5 lbs

Included Parts on all Variations except mecanum (am-3297)

2 - Chassis Inside Plate (am-3392_Inside)
2 - Chassis Outside Plate (am-3392_Outside)
4 - 4x4 Plate for Chassis (am-3393)
1 - Belly Pan for Chassis (am-3394)
2 - Peanut Extrusion, 11.25" (am-3395)
2 - Churro Tubing, 11.25" (am-3398)
8 - Churro, 63mm (am-3399)
4 - HTD Timing Belt, 9mm wide, 93T (am-3378)
2 - Duo Plate for PicoBox (am-3405)
8 - 6mm D Bore Double Boss Nub w/Set Screw (am-3215)
4 - 6mm Round Bore Double Boss Nub w/Set Screw (am-3413)
14 - 6x12x4mm Flanged Bearing (am-3377)
6 - 24T HTD Pulley, 6mm Bore (am-3401)
2 - 24T HTD Pulley Extension (am-3404)
6 - 40T Gear for PicoBox (am-3407)
4 - 35T Gear for PicoBox (am-3408)
4 - 45T Gear for PicoBox (am-3409)
8 - Spacer for PicoBox (am-3406)
2 - 6mm D Shaft x 100mm (am-3226-100)
4 - Aluminum Spacer, 5/16" OD x .257 ID x 1/4" (am-3424)
2 - Aluminum Spacer, 8mm OD x 6.15mm ID x 15mm (am-3425)
2 - Aluminum Spacer, 12.7mm OD x 6.15mm ID x 9mm (am-3426)
1 - Red Tacky Grease, 14.2 gram (am-2768)
56 - Button-Head Cap Screw, 6-32 x 1/2" (am-1418)
8 - Button-Head Cap Screw, 6-32 x 3/4" (am-1415)
16 - Button-Head Cap Screw, 6-32 x 1 1/4" (am-1416)
32 - Nylock Nut, 6-32 (am-1419)
28 - Thread-Forming Screw, 1/4-20 x 3/4" (am-1310)
8 - Button-Head Cap Screw, 1/4-20 x 1 3/4" (am-1420)
8 - Nylock Nut, 1/4-20 (am-1102)
24 - Socket-Head Cap Screw, M3-0.5 x 6mm (am-1254)
4 - Socket-Head Cap Screw, M6-1 x 75mm (am-1417)
4 - Nylock Nut, M6-1.0 (am-1111)

TileRunner (am-3437) Includes above (am-3297) and:

4 - NeveRest 40 Gearmotor (am-2964a)
6 - 4" Stealth Wheel, 8mm Bore, Gray (am-2648)
2 - Hall Effect Encoder Cable with 4-Pin Connector (am-2992)

GT (am-3437_gt) Includes above (am-3297) and:

4 - NeveRest 40 Gearmotor (am-2964a)
6 - 4" Stealth Wheel, 8mm Bore, 60 Durometer Black (am-2648_blk)
2 - Hall Effect Encoder Cable with 4-Pin Connector (am-2992)

BullDozer (am-3437_bd) Includes above (am-3297) and:

4 - NeveRest 60 Gearmotor (am-3103)
6 - 4" Stealth Wheel, 8mm Bore, 50 Durometer Blue (am-2648_blue)
2 - Hall Effect Encoder Cable with 4-Pin Connector (am-2992)

Omni (am-3437_omni) Includes above (am-3297) and:

4 - NeveRest 40 Gearmotor (am-2964a)
2 - 4" Stealth Wheel, 8mm Bore, 60 Durometer Black (am-2648_blk)
4 - FTC 4 inch Aluminum Omni Wheel With 8mm Bore (am-2948)
8 - 6-32 x .750 BHCS (am-1415)
2 - Hall Effect Encoder Cable with 4-Pin Connector (am-2992)

Hulk (am-3437_hulk) Includes above (am-3297) and:

4 - NeveRest 40 Gearmotor (am-2964a)
6 - 4" Performance Wheel 8mm Bore (am-3434)
1 - 10 ft. of Green Grippy Tread (am-2611)
4 - 6mm Round Bore Double Boss Nub w/Set Screw (am-3413)

Mecanum (am-3437_mec) Includes in entirety:

2 - Chassis Inside Plate (am-3392_Inside)
2 - Chassis Outside Plate (am-3392_Outside)
4 - 4x4 Plate for Chassis (am-3393)
1 - Belly Pan for Chassis (am-3394)
2 - Peanut Extrusion, 11.25" (am-3395)
2 - Churro Tubing, 11.25" (am-3398)
8 - Churro, 63mm (am-3399)
4 - NeveRest 40 Gearmotor (am-2964a)
1 - 4" Standard Mecanum Wheel, Wheel Set (am-2626)
14 - 6x12x4mm Flanged Bearing (am-3377) - two extra included, not needed in assembly
12 - 6mm D Bore Double Boss Nub w/Set Screw (am-3215)
4 - Hall Effect Encoder Cable with 4-Pin Connector (am-2992)
8 - 40T Gear for PicoBox (am-3407)
4 - 35T Gear for PicoBox (am-3408)
4 - 45T Gear for PicoBox (am-3409)
4 - Uno Plate for PicoBox (am-3423)
4 - 6mm D Shaft x 100mm (am-3226-100)
6 - Spacer for PicoBox (am-3406)
8 - Aluminum Spacer, 12.7mm OD x 6.15mm ID x 9mm (am-3426)
1 - Red Tacky Grease, 14.2 gram (am-2768)
4 - Spacer, 3/8 OD x .257 ID x 19/32 (am-1290)
28 - Thread-Forming Screw, 1/4-20 x 3/4" (am-1310)
64 - Button-Head Cap Screw, 6-32 x 1/2" (am-1418) - eight extra included, not needed in assembly
24 - Nylock Nut, 6-32 (am-1419)
16 - Button-Head Cap Screw, 1/4-20 x 1 3/4" (am-1420)
16 - Nylock Nut, 1/4-20 (am-1102)
24 - Socket-Head Cap Screw, M3-0.5 x 6mm (am-1254)
16 - Button-Head Cap Screw, 6-32 x 1 1/4" (am-1416)

Write your own review

Product can be reviewed only after purchasing it
Only registered users can write reviews

Review title:

Review text:

Rating:

Bad
Excellent

Also Purchased

Arduino Starter kit

#K000007

$149.00

(1 In stock)

The Arduino Starter Kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensor and actuators.

Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

#am-2986

$8.00

(83 In stock)

This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.

Specifications:

Inside diameter: 0.500-0.502 inch hex bore
Outside diameter: 1.125 inch
Flange thickness: 0.062 inch
Overall thickness: 0.312 inch
Weight: 0.05 pound

Studica Robotics FTC Starter Kit (2023-2024)

#70404

$950.00

(In stock)

New for the 2023-2024 Season

Download the Kit List here.

FTC Teams are eligible to get 1 kit at a heavily discounted price. To apply for the discount please fill out this application form.

This kit does not include any control system components.

10 mm ID 26 mm OD Shielded Bearing (6000ZZ)

#am-4468

$4.25

Product Overview

This is a 10 mm round bore bearing that is unflanged. The Shielded Ball Bearing is a great way to make things spin fast!

Specifications

Bore: 10 mm Round
Flange: Unflanged
Material: Steel
Outside Diameter: 26 mm
Seal Type: Shielded
Style: Radial
Weight: 0.04 lbs
Width: 8 mm

Tetrix Prime Dual Control Set

#44322

$918.53

This set includes everything you need for students to start building remote-controlled and autonomous-controlled robots with the TETRIX PRIME system.

Includes:

TETRIX PULSE Robotics Controller with USB cable
Grove Line Finder and Ultrasonic Sensors
Gamepad-style, four-channel wireless controller for easy operation of the motors and servos
290+ Tetrix Prime; aluminum and plastic pieces including structural elements, connectors, hubs, brackets, wheels, and gears plus a Gripper Kit
Rechargeable battery pack and charger
2 standard servos, 2 continuous rotation servos, and 2 six-volt DC motors
On/off switch
4-in-1 screwdriver, 2-in-1 screwdriver, and hex nut driver
Sturdy storage bin
Balls and cups for robot course
Detailed and graphic programming and builder’s guide

Tetrix Max Structure Pack

#42998

$234.41

This pack offers 70 additional structural elements, perfect for outfitting classrooms or robotics competition teams with an assortment of building and design components.

Includes:

Channels in every length
Variety of flats in every length, as well as flat brackets, bars, and plates
Assortment of brackets such as corner brackets, inside C connectors, and angle corner brackets, along with angle bars and round spacers

Tetrix Max R/C Starter Set

#41990

$1119.95

If you can dream up a design, you can build it with the TETRIX MAX Building System. TETRIX is a complete design system for students who are serious about engineering.

Featuring heavy-duty, aircraft-grade aluminum elements for construction, powerful drive motors, and expandable capabilities, TETRIX provides the ideal platform for creativity. Whether students want to build a basic square-chassis robot base with a remote control or incorporate other electronics (not included) to design a highly specific autonomous robot, this system is unlimited. Designed to provide one student or a team of students with the hardware to get started on a robotics or other build project, this starter set eliminates the worry that you might miss a needed part to finish the project.

Includes the comprehensive TETRIX MAX Builder’s Guide (hard copy and CD), a 190-page teacher’s resource packed with several model build instructions, safety information, resources, challenges, and more. Includes a variety ofTetrix Max; structural elements, DC motors, servos and hardware, gears, wheels, axles, tubing, flats and angles, and channels. It also includes a gamepad controller and batteries, rechargeable battery and charger, motor and servo controller board, and storage case with lid.

Number of Pieces: 584

Climber in a Box Bearing Kits - 1 to 1.5 extrusion

#am-4661

$79.00

(0 In stock)

This kit is made of the components that facilitate smooth linear movement on the Climber in a Box. The Bearing Kits are made to allow a piece of Box Extrusion to telescopically slide in and out of another, a large piece of Box Extrusion. These kits either come with brackets that work with a 1 in. and 1.5 in. box tube, or a 1.5 in. and 2 in. box tube.

Items Included in am-4661:

2 - 1.5 in. Tube Bearing Plate (am-4644)
4 - 0.192 in. ID 0.375 in. OD 1.5 in. Long Aluminum Spacer (am-1599)
2 - 0.375 in. ID 0.5 in. OD 0.688 in. Long Plastic Spacer (am-1611)
2 - 0.192 in. ID 0.3125 in. OD 1.5 in. Long Aluminum Spacer (am-1503)
2 - Insider Slider Block (am-4629)
2 - 1 x 1 in. Clamp Slider Block (am-4630)
2 - 0.192 in. ID 5/16 in. OD 0.875 in. Long Male to Female Aluminum Standoff (am-1613)
2 - 0.625 in. Wide 30 in. Long Constant Force Spring (am-4657)
8 - 8 mm Flat Washer (am-1009)
4 - 8 mm ID 22 mm OD Shielded Bearing (608ZZ) (am-4456)
8 - 10-32 Nylock Jam Nut (am-1063)
6 - 10-32 Jam Nut (am-1612)
6 - 10-32 x 2 in. Socket Head Cap Screw (am-1049)
8 - 10-32 x 3/8 in. Button Head Cap Screw with Nylon Patch (am-1588)
6 - #10 Flat Washer (am-1026)
4 - 10-32 x 0.5 in. Hex Drive Flat Head Cap Screw with Nylon Patch (am-1505)

Items Included in am-4662:

2 - 2 in. Tube Bearing Plate (am-4645)
4 - 0.192 in. ID 0.375 in. OD 2 in. Long Aluminum Spacer (am-1600)
2 - 0.33 in. ID 0.47 in. OD 1.18 in. Long Plastic Spacer (am-1610)
2 - 0.192 in. ID 0.3125 in. OD 2 in. Long Aluminum Spacer (am-1582)
2 - Insider Slider Block (am-4629)
2 - 1.5 x 1.5 in. Clamp Slider Block (am-4631)
2 - 0.625 in. Wide 30 in. Long Constant Force Spring (am-4657)
8 - 8 mm Flat Washer (am-1009)
4 - 8 mm ID 22 mm OD Shielded Bearing (608ZZ) (am-4456)
12 - 10-32 Nylock Jam Nut (am-1063)
6 - 10-32 Jam Nut (am-1612)
6 - 10-32 x 2.5 in. Socket Head Cap Screw (am-1024)
8 - 10-32 x 3/8 in. Button Head Cap Screw with Nylon Patch (am-1588)
6 - #10 Flat Washer (am-1026)
4 - 10-32 x 0.5 in. Hex Drive Flat Head Cap Screw with Nylon Patch (am-1505)

Documents

Layout Print(s)

am-4661 1.5in to 1.0in Tubing Bearing Kit.pdf

am-4662 2.0in to 1.5in Climber in a Box Bearing Assembly.pdf

CAD File(s)

am-4661 1.5in to 1.0in Tubing Bearing Kit.STEP

am-4662 2.0in to 1.5in Climber in a Box Bearing Assembly.STEP

Tetrix Prime Programmable Set

#44321

$815.00

This set includes what you need for students to start building programmable robots with the TETRIX PULSE Robotics Controller.

Includes:

TETRIX PULSE Robotics Controller with USB cable
Grove Line Finder and Ultrasonic Sensors
290+ Tetrix Prime; aluminum and plastic pieces including structural elements, connectors, hubs, brackets, wheels, and gears plus a Gripper Kit
Rechargeable battery pack and charger
2 standard servos and 2 six-volt DC motors
4-in-1 screwdriver, 2-in-1 screwdriver, and hex nut driver
Sturdy storage bin
Balls and cups for robot course
Detailed and graphic programming guide

Tetrix Prime Expansion Set

#41549

$512.57

Expand the horizons of your TETRIX PRIME R/C Starter Set. Engineer bigger, more advanced robots, increase the robustness of builds, and combine all the Tetrix Prime; components using the additional parts and pieces included in the Tetrix Prime; Expansion Set.

The Tetrix Prime; Expansion Set comes with three major parts that will provide students more design options for their robots:

Aluminum linkages – Mechanical linkages connect to manage force and movement.
Aluminum plates – Create custom gearboxes, strengthen connections, or create new ways to connect and combine all the Tetrix Prime; components.
Aluminum gussets – Use to connect beams or structural components as well as provide additional strength to joints.
Tetrix Prime; parts and pieces are made from aluminum and plastic.

Gear Ratios
The kit comes with 3 different gear ratio options, so that you can experiment and understand how changing the gear ratio affects the driving performance of the TileRunner.

45 Tooth and 35 Tooth gear combination yields a 1:0.78 over drive
Two 40 Tooth gears yield a 1:1 ratio
35 Tooth and 45 Tooth gear combination yields a 1:1.28 reduction

TileRunner GT (am-3437_gt): For increased maneuverability, this version substitutes NeveRest 40 gearmotors (am-2964a) and black 4" Stealth Wheels (am-2648_Blk) with higher grip than stock.
TileRunner BullDozer (am-3437_bd): When you want to push, pick this! NeveRest 60 gearmotors (am-3103) provide maximum torque, while six of our softest compound blue 4" Stealth Wheels (am-2648_Blue) put that to the ground for maximum pushing force. Pushing hard will increase wear on these wheels, so have a spare set handy for competition time.
TileRunner Mecanum (am-3437_mec): Get set to strafe with four PicoBox Unos replacing the two PicoBox Duos of the standard TileRunner. You'll receive four 4" standard-duty mecanum wheels (am-2538) instead of Stealth Wheels, as well as all the spacers, shafts, and gears to get you up and running.
TileRunner Omni (am-3437_omni): 6WD with omniwheels at the corners is a popular choice among FIRST Tech Challenge teams. Instead of the standard Stealth Wheels, this variation includes two black 4" stealth wheels (am-2648_Blk), four 4" aluminum omniwheels (am-2948), and the necessary hardware.
TileRunner Hulk (am-3437_hulk): The TileRunner Hulk is your go-to for heavy robots! Six 4" Performance Wheels (am-3434) and a 10' roll of our Green Grippy Tread (am-2611) replace the Stealth Wheels and provide a very robust drive system.
TileRunner - No Wheels or Gearmotors (am-3297): Already stocked up on wheels and our NeveRest motors? No worries, this version omits them. You'll still receive the PicoBox Duo gearboxes and all the motion and structure components of the standard TileRunner.

See the Upgrades page if you already have a TileRunner.

Specifications:

Shipping Box Size estimate: 12" x 19" x 3.25"
Weight (TileRunner, with wheels and gearmotors): ~ 11.5 lbs

Included Parts on all Variations except mecanum (am-3297)

2 - Chassis Inside Plate (am-3392_Inside)
2 - Chassis Outside Plate (am-3392_Outside)
4 - 4x4 Plate for Chassis (am-3393)
1 - Belly Pan for Chassis (am-3394)
2 - Peanut Extrusion, 11.25" (am-3395)
2 - Churro Tubing, 11.25" (am-3398)
8 - Churro, 63mm (am-3399)
4 - HTD Timing Belt, 9mm wide, 93T (am-3378)
2 - Duo Plate for PicoBox (am-3405)
8 - 6mm D Bore Double Boss Nub w/Set Screw (am-3215)
4 - 6mm Round Bore Double Boss Nub w/Set Screw (am-3413)
14 - 6x12x4mm Flanged Bearing (am-3377)
6 - 24T HTD Pulley, 6mm Bore (am-3401)
2 - 24T HTD Pulley Extension (am-3404)
6 - 40T Gear for PicoBox (am-3407)
4 - 35T Gear for PicoBox (am-3408)
4 - 45T Gear for PicoBox (am-3409)
8 - Spacer for PicoBox (am-3406)
2 - 6mm D Shaft x 100mm (am-3226-100)
4 - Aluminum Spacer, 5/16" OD x .257 ID x 1/4" (am-3424)
2 - Aluminum Spacer, 8mm OD x 6.15mm ID x 15mm (am-3425)
2 - Aluminum Spacer, 12.7mm OD x 6.15mm ID x 9mm (am-3426)
1 - Red Tacky Grease, 14.2 gram (am-2768)
56 - Button-Head Cap Screw, 6-32 x 1/2" (am-1418)
8 - Button-Head Cap Screw, 6-32 x 3/4" (am-1415)
16 - Button-Head Cap Screw, 6-32 x 1 1/4" (am-1416)
32 - Nylock Nut, 6-32 (am-1419)
28 - Thread-Forming Screw, 1/4-20 x 3/4" (am-1310)
8 - Button-Head Cap Screw, 1/4-20 x 1 3/4" (am-1420)
8 - Nylock Nut, 1/4-20 (am-1102)
24 - Socket-Head Cap Screw, M3-0.5 x 6mm (am-1254)
4 - Socket-Head Cap Screw, M6-1 x 75mm (am-1417)
4 - Nylock Nut, M6-1.0 (am-1111)

TileRunner (am-3437) Includes above (am-3297) and:

4 - NeveRest 40 Gearmotor (am-2964a)
6 - 4" Stealth Wheel, 8mm Bore, Gray (am-2648)
2 - Hall Effect Encoder Cable with 4-Pin Connector (am-2992)

GT (am-3437_gt) Includes above (am-3297) and:

4 - NeveRest 40 Gearmotor (am-2964a)
6 - 4" Stealth Wheel, 8mm Bore, 60 Durometer Black (am-2648_blk)
2 - Hall Effect Encoder Cable with 4-Pin Connector (am-2992)

BullDozer (am-3437_bd) Includes above (am-3297) and:

4 - NeveRest 60 Gearmotor (am-3103)
6 - 4" Stealth Wheel, 8mm Bore, 50 Durometer Blue (am-2648_blue)
2 - Hall Effect Encoder Cable with 4-Pin Connector (am-2992)

Omni (am-3437_omni) Includes above (am-3297) and:

4 - NeveRest 40 Gearmotor (am-2964a)
2 - 4" Stealth Wheel, 8mm Bore, 60 Durometer Black (am-2648_blk)
4 - FTC 4 inch Aluminum Omni Wheel With 8mm Bore (am-2948)
8 - 6-32 x .750 BHCS (am-1415)
2 - Hall Effect Encoder Cable with 4-Pin Connector (am-2992)

Hulk (am-3437_hulk) Includes above (am-3297) and:

4 - NeveRest 40 Gearmotor (am-2964a)
6 - 4" Performance Wheel 8mm Bore (am-3434)
1 - 10 ft. of Green Grippy Tread (am-2611)
4 - 6mm Round Bore Double Boss Nub w/Set Screw (am-3413)

Mecanum (am-3437_mec) Includes in entirety:

2 - Chassis Inside Plate (am-3392_Inside)
2 - Chassis Outside Plate (am-3392_Outside)
4 - 4x4 Plate for Chassis (am-3393)
1 - Belly Pan for Chassis (am-3394)
2 - Peanut Extrusion, 11.25" (am-3395)
2 - Churro Tubing, 11.25" (am-3398)
8 - Churro, 63mm (am-3399)
4 - NeveRest 40 Gearmotor (am-2964a)
1 - 4" Standard Mecanum Wheel, Wheel Set (am-2626)
14 - 6x12x4mm Flanged Bearing (am-3377) - two extra included, not needed in assembly
12 - 6mm D Bore Double Boss Nub w/Set Screw (am-3215)
4 - Hall Effect Encoder Cable with 4-Pin Connector (am-2992)
8 - 40T Gear for PicoBox (am-3407)
4 - 35T Gear for PicoBox (am-3408)
4 - 45T Gear for PicoBox (am-3409)
4 - Uno Plate for PicoBox (am-3423)
4 - 6mm D Shaft x 100mm (am-3226-100)
6 - Spacer for PicoBox (am-3406)
8 - Aluminum Spacer, 12.7mm OD x 6.15mm ID x 9mm (am-3426)
1 - Red Tacky Grease, 14.2 gram (am-2768)
4 - Spacer, 3/8 OD x .257 ID x 19/32 (am-1290)
28 - Thread-Forming Screw, 1/4-20 x 3/4" (am-1310)
64 - Button-Head Cap Screw, 6-32 x 1/2" (am-1418) - eight extra included, not needed in assembly
24 - Nylock Nut, 6-32 (am-1419)
16 - Button-Head Cap Screw, 1/4-20 x 1 3/4" (am-1420)
16 - Nylock Nut, 1/4-20 (am-1102)
24 - Socket-Head Cap Screw, M3-0.5 x 6mm (am-1254)
16 - Button-Head Cap Screw, 6-32 x 1 1/4" (am-1416)

Customers who bought this item also bought

Arduino Starter kit

#K000007

$149.00

(1 In stock)

Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

#am-2986

$8.00

(83 In stock)

Specifications:

Inside diameter: 0.500-0.502 inch hex bore
Outside diameter: 1.125 inch
Flange thickness: 0.062 inch
Overall thickness: 0.312 inch
Weight: 0.05 pound

Studica Robotics FTC Starter Kit (2023-2024)

#70404

$950.00

(In stock)

New for the 2023-2024 Season

Download the Kit List here.

FTC Teams are eligible to get 1 kit at a heavily discounted price. To apply for the discount please fill out this application form.

This kit does not include any control system components.

10 mm ID 26 mm OD Shielded Bearing (6000ZZ)

#am-4468

$4.25

Product Overview

This is a 10 mm round bore bearing that is unflanged. The Shielded Ball Bearing is a great way to make things spin fast!

Specifications

Bore: 10 mm Round
Flange: Unflanged
Material: Steel
Outside Diameter: 26 mm
Seal Type: Shielded
Style: Radial
Weight: 0.04 lbs
Width: 8 mm

Tetrix Max Structure Pack

#42998

$234.41

This pack offers 70 additional structural elements, perfect for outfitting classrooms or robotics competition teams with an assortment of building and design components.

Includes:

Channels in every length
Variety of flats in every length, as well as flat brackets, bars, and plates
Assortment of brackets such as corner brackets, inside C connectors, and angle corner brackets, along with angle bars and round spacers

Tetrix Max R/C Starter Set

#41990

$1119.95

If you can dream up a design, you can build it with the TETRIX MAX Building System. TETRIX is a complete design system for students who are serious about engineering.

Number of Pieces: 584