This is a simple brass extruded adapter for the PG71 gearmotor. The intent of this part is to go over the PG71 output shaft, making the perimeter geometry of the shaft to be 1/2" diameter with a 1/8" machine key.
This sleeve is a tight fit over the PG71 shaft. It can be held in place by a 3/8" id retaining ring, for help please see this video: https://www.youtube.com/watch?v=4-6ob_uILi0
Usage and Installation:
There is a tight fit onto the PG71 shaft when installing this adapter, often to the point that the brass will peel away when pushing the adapter onto the shaft. This will help keep the part in place. When using the 500 Key Hub (am-0077) or another 1/2" bore, keyed item, we suggest to press in the adapter to the hub first, and then press the hub/adapter assembly onto the PG71 shaft. When pressing on to the shaft, a bit of brass will peel away, resulting in a snug fit.
Specifications:
- Material: Brass
- Outside width: 0.499 inch
- Length: 0.75 inch
- Key: 1/8x1/8 inch
- Bore: 10mm (0.394 inch)
- Weight: 0.05 pound