Close
Main Categories
    Filters
    Preferences
    Search

    0.375 in. Thick 24 in. x 24 in. Polycarbonate Sheet

    Polycarbonate is a terrific material to use when constructing robots. Bolt it to two separate components to add some rigidity or use it to cover an area to keep items out while being able to see inside.

     

    This is a single sheet of polycarbonate (PC) plastic, cut to a 24x24 in. square. This single sheet will be shipped with a protective covering on both sides of the plastic.


    Polycarbonate was invented in 1963 by Dan Fox at General Electric. GE's trade name for this plastic is LEXAN, but it also is sold under other trade names (Makrolon, Hyzod, Cyrolon). This material is NOT plexiglas or acrylic, as we don't suggest that you use that material on a mobile robot, since acrylic will easily shatter.

     

    Specifications

    • Length: 24 in. (+/- 0.25)
    • Material: Polycarbonate
    • Thickness: 0.375 in.
    • Weight: 9.6 lbs
    • Width: 24 in. (+/- 0.25)
    MFR Part #: am-4582
    $129.00
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    Arduino Starter kit

    #K000007
    $149.00
    (2 In stock)
    The Arduino Starter Kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensor and actuators.

    #10-32 x 0.625" SHCS - Min 25

    #am-1120
    $0.47
    (In stock)

    Specifications:

     

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 10-32
    • Length: 5/8 inch
    • Head: Socket Head Cap Screw
    • Yellow Nylon Thread Lock Patch

    10-32 Nylock Nut

    #am-1042
    $0.08
    (In stock)

    This item can only be purchased in multiples of 25

     

    Specifications: 

    • Material: Steel
    • Coating: Zinc Plated
    • Thread: #10-32
    • Thickness: 0.249"
    • Thread: Fine
    • Thread Size: 32
    • Type: Nylon Insert Lock Nut
    • Wrench Size: 3/8"

    1/2" External Retaining Ring

    #am-2371
    $0.47
    (In stock)

    1/2 inch external retaining ring, used in the RAW Box. 

    Specifications: 

    • Material: Steel
    • For Shaft Diameter: 1/2"
    • Thickness: 0.031"
    • Type: External Retaining Ring
    • Free Inside Diameter: 0.456"
    • Plier Hole Diameter: 0.40"
    • Weight: 0.002 pounds

    1/2 in. ID Black Nylon Washer

    #am-1001
    $0.49
    (In stock)

    Nylon washer with a 1/2 in. inside diameter.

     

    This item can only be purchased in multiples of 10

     

     

    Specifications

    • Inside Diameter: 0.505 in.
    • Material: Nylon
    • Outside Diameter: 0.750 in.
    • Thickness: 0.062 in.

    Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

    #am-2986
    $8.00
    (107 In stock)

    This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

    This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


    Specifications:

    • Inside diameter: 0.500-0.502 inch hex bore
    • Outside diameter: 1.125 inch
    • Flange thickness: 0.062 inch
    • Overall thickness: 0.312 inch
    • Weight: 0.05 pound