This is a 24 tooth sprocket with a 10mm DD bore.

The #25 Chain with Master Links  set works with any of the Studica sprockets and other #25 sprockets. It includes 4 master links for creating various lengths of the chain.

Specifications:

• #25 Steel roller chain
• 4 master connecting links
• Length: 150cm

#25 Connecting Link (Master Link) 

Specifications:

• Material: Steel
• Style: Roller Chain - Spring Clip
• Type: Connecting Link
• Size: #25
• Pitch: 0.250 inch
• Weight: 0.01 lbs

#25 Half Link. Also known as #25 Offset Link. 

Specifications:

• Material: Steel
• Style: Roller Chain with interted pin
• Type: Half Link
• Size: #25
• Pitch: 0.25 inch
• Weight: 0.01 lbs

This Inline Chain Tensioner for #25 series roller chain is perfect to adjust the desired tension in a long run of chain on mechanisms such as elevators and arms. This is ideal where there is at least a ~3" section of chain that never passes over a sprocket in a given mechanism. Pair this with two #25 Master Links and integrate this to your project for an easy-to-use chain tension solution!

The design of this product was inspired by Misumi's Chain Turnbuckles. This product has been improved to be compatible with imperial-sized wrenches.

Specifications

• Chain Size: #25

Documents

CAD File(s)

am-3915_25 25 Chain Inline Tensioner REV3.STEP

Layout Print(s)

am-3915_25 #25 Chain Inline Tensioner REV3.PDF

#25 Roller Chain, 10 feet 

Product Overview:

• Material: Steel
• Specification: ASME/ANSI B29.1
• Style: Riveted - Single Strand
• Type: Roller Chain
• Size: #25
• Pitch: 1/4"
• Weight: 1.014 lbs

#35 Connecting Link (Master Link) 

Specifications:

• Material: Steel
• Style: Roller Chain - Spring Clip
• Type: Connecting Link
• Size: #35
• Pitch: 0.375 inch
• Weight: 0.01 lbs

#35 Half Link. Also known as #35 Offset Link. 

Specifications:

• Material: Steel
• Style: Roller Chain with interted pin
• Type: Half Link
• Size: #35
• Pitch: 0.375 inch
• Weight: 0.01 lbs

This Inline Chain Tensioner for #35 series roller chain is perfect to adjust the desired tension in a long run of chain on mechanisms such as elevators and arms. This is ideal where there is at least a ~3" section of chain that never passes over a sprocket in a given mechanism. Pair this with two #35 Master Links and integrate this to your robot for an easy-to-use chain tension solution!

The design of this product was inspired by Misumi's Chain Turnbuckles. This product has been improved to be compatible with imperial-sized wrenches.

Specifications

• Chain Size: #35

Documents

CAD File(s)

am-3914_35 35 Chain Tensioner.STEP

Layout Print(s)

am-3914_35 #35 Chain Inline Tensioner.PDF

#35 Roller Chain, 10 feet 

Specifications:

• Material: Steel
• Specification: ASME/ANSI B29.1
• Style: Riveted - Single Strand
• Type: Roller Chain
• Size: #35
• Pitch: 3/8"
• Weight: 2.5 lbs

#4 Steel Washer 

Specifications:

• Material: Steel
• Finish: Zinc
• Outside Diameter: 0.31 inch
• Inside Diameter: 0.13 inch
• Thickness: 0.02 to 0.04 inch
• Weight: 0.0004 lbs

This steel shoulder screw is used in the EVO Shifter Four Tooth Dog Gear (am-3568).

Specifications:

• Thread: #4-40
• Length: 0.75"
• Thread Length: 0.125"
• Weight: 0.006 Lbs
• Head: Socket Head Cap Screw

#4-40 x 7/8" Long with 1/2" shoulder Socket Head Cap Screw used in the Dog Gear

Specifications:

• Quantity: 1
• Thread: #4-40
• Length: 7/8 inches
• Shoulder Length: 1/2 inches
• Weight: 0.001 pounds
• Head: Socket Head Cap Screw

These 6-32 1.25" Hex Head Machine Screw can be used for fastening Nubs to other motion products.

Specifications:

• Material: Steel
• Coating: Zinc plated
• Thread: 6-32
• Length: 1.25"
• Head: Hex
• Weight: 0.0045 lbs

These screws are used within the FIRST STEAMWORKS? Gear. The FIRST STEAMWORKS? Gear uses 20 screws for assembly. This screw is available in quantities of 25, giving you a few extras when assembling.

Specifications:

• Diameter: #8
• Diameter - Thread Size: #8 - 15
• Drive: Phillips
• Drive Size: #2
• Finish: Zinc
• Head: Pan
• Length: 5/8"
• Material: Steel