Easy to install panel mount volt meter features a bright easy to read red display. Monitor DC voltage from 5-30 VDC. Fits standard 1-1/8" diameter hole. Low 10mAh current draw. Rear mounted F2 faston tab connections. Specifications:
0.1 in. - spaced connectors commonly used as the PWM (Pulse Width Modulation) Connectors on mobile robots and a simple controls method for many speed controllers.
25 crimp connector housings that would hold 3 pins at a 0.1 in. spacing are included as well as 100 FEMALE Pins that would be crimped on 22-28 AWG wires and snapped into the crimp connector housings.
Be sure to get a proper PWM crimp connector to be sure your connections are tight.
This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.
Anderson Power Products Connector with 2 contacts. Specifications:
Included Hardware:
The MINI® Fuse is the standard for vehicle circuit protection. Its miniature design meets the need for more circuits to be protected while utilizing less space, and its ability to cope with high temperatures in adverse environments makes the MINI® Fuse of recommended choice for protection.
This mini fuse can be used in our Power Pole Distribution Board (am-3699), as well as a replacement in the Power Distribution Panel (am-2856)
Snap action breakers are used commonly in mobile robot applications such as FIRST Robotics Competition power distribution boards. We offer several amperage versions.
25 crimp connector housings that would hold 3 pins at a 0.1 in. spacing are included as well as 100 MALE Pins that would be crimped on 22-28 AWG wires and snapped into the crimp connector housings.
This true HD camera gives you bright and colorful video, and makes it easy to post to your favorite social sites. Microsoft Lifecam HD-3000 Webpage Specifications:
Features (From Manufactuer Website):
This Inline Chain Tensioner for #25 series roller chain is perfect to adjust the desired tension in a long run of chain on mechanisms such as elevators and arms. This is ideal where there is at least a ~3" section of chain that never passes over a sprocket in a given mechanism. Pair this with two #25 Master Links and integrate this to your project for an easy-to-use chain tension solution!
The design of this product was inspired by Misumi's Chain Turnbuckles. This product has been improved to be compatible with imperial-sized wrenches.
CAD File(s)
am-3915_25 25 Chain Inline Tensioner REV3.STEP
Layout Print(s)
am-3915_25 #25 Chain Inline Tensioner REV3.PDF
This is a 25 foot section of a twisted pair of 22 AWG wire.