The Studica Linear Servo RC Actuator 50S-95N is a new Servo motor which has a stroke of 50mm and a max force of 95N. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.
Specifications:
The NeveRest Orbital gearmotor is a robust planetary gearmotor designed for FTC. With many ratios to choose from you can find the right motor for you, from a fast spinning intake to a high reduction arm, all are possible with NeveRest Orbitals. They have a pre-installed encoder and an output shaft directly in the center of the output face. The shaft is a 6 mm D and the gearbox housing is 37 mm in diameter.
#25 Connecting Link (Master Link) Specifications:
485 Servo Pack is one of the best choices for rugged robotic applications. This servo’s great performance and durability are a combination of karbonite gears, high-performance circuitry, and a ball bearing-supported output shaft. Karbonite gearing is nearly four times stronger than nylon gears and provides virtually wear-free performance. Standard rotational range is 90 degrees, but it can be operated to 180 degrees with controllers capable of generating a pulse range from 600 usec to 2400 usec. Produces nearly 84 oz-in of torque power.
The NeveRest 40 is a gearmotor with an attached encoder. The output shaft geometry and the gearbox housing diameter is similar to what FTC teams are familiar with. The shaft is a 6 mm D and the gearbox housing is 37 mm diameter.
FIRST Legality:
Encoder: There is an encoder mounted to the backside of this motor. It is a 7 pulse per revolution (ppr), hall effect encoder. Since the motor's gearbox has a 40:1 reduction, then the NeverRest 40 output shaft provides 280 ppr.
Encoder Cable Options: NeveRest motors do not come with an encoder cable as we offer 3 cable options:
am-3926a allows you to connect the encoder directly to the FIRST Tech Challenge REV Controller.
am-2992 has the 4 encoder pins joined in one housing using standard 0.1" spacing.
am-2993 allows you to break out the 4 pins separately if you need them in a different order. Working with the Encoders:
Performance Specs: Force Needed to Break Gearbox: 1478 oz-in Time to Failure at Stall: 2 minutes, 54 seconds Motor Case Temperature at Failure: 190 degrees F
This power switch is legal for use in FTC competition.
This switch makes for a simple and satisfying power switch for a robot. It features easy to use XT30 connectors.
We've specially designed the mounting bracket to be compatible with most building systems..
The Studica Light Weight Shaft Hub is used with the 6mm D shafts. It has a 5mm set screw for tight clamping and seven M3 tapped mounting holes.
Specifcation:
Φ29.0mm*16.0mm thick 6*M3 thread tapping through (including 2*M3 thread for M3 SHCS) Φ6.0mm D hole AL6061-T6
Axle Shaft Couplers make an extended axle without a hitch. Just use it to connect two axle shafts together.
Axle Set Collars lock a rotating axle to secure the horizontal alignment.
PRE-ORDER Only shipping January 2023
Φ20.0mm*8.0mm thick 2*M3 thread for M3 SHCS on the clamp side Φ6.0mm D hole AL6061-T6
The Studica Linear Servo RC Actuator 140S-190N is a new Servo motor which has a stroke of 140mm and a max force of 190N. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.
The Studica Linear Servo RC Actuator 140S-95N is a new Servo motor which has a stroke of 140mm and a max force of 95N. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.
The Studica Linear Servo RC Actuator 50S-190N is a new Servo motor which has a stroke of 50mm and a max force of 190N. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.