Fermer
Menu
toutes catégories
    (0) Soumission
    Vous avez pas d'articles dans votre panier.
    (0) Produits
    Vous avez pas d'articles dans votre panier.
    Menu
    Panier
    filtres
    préférences
    Rechercher
    PrécédentInside L Bracket (2 pack)
    SuivantIrregular Bracket Pack

    Inside U Bracket (2 pack)

    Soyez le premier a tester ce produit

    Made from 3mm thick heavy 6061-T6 Aluminum, the Inside U Bracket is 42mm x 45mm and is used inside the U Channel or Low profile channel.. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File
    # Pièce: 76086-2
    $8.32
    Disponibilité: 135 en stock

    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent

    A également acheté

    Photo de 6mm D Shape Collar Clamp

    6mm D Shape Collar Clamp

    #76320
    $6.93
    (1180 En stock)

    May be used with 6mm D-Shape Shaft to secure wheels in their position.
     

    Specifications:

    • Φ20.0mm*8.0mm thick
    • 1*M3 thread for M3 SHCS on the clamp side
    • Φ6.0mm D hole
    • AL6061-T6
    • Step File

     

    Photo de Clamping Shaft Hub - v2

    Clamping Shaft Hub - v2

    #76280
    $11.05
    (1146 En stock)

    Made of aluminum, the Studica Clamping Shaft Hub is used with flex and drive wheels 

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm ID
    • Hole pattern for connecting to structure
    • Step File 
    Photo de End Piece Plate (2 pack)

    End Piece Plate (2 pack)

    #76143-2
    $13.88
    (590 En stock)

    The Studica End Piece Plate is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

     

    Photo de #25 - 24 Tooth Sprocket (2 pack)

    #25 - 24 Tooth Sprocket (2 pack)

    #76226-2
    $15.27
    (1404 En stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Number of teeth: 24
    • Step File

    Photo de Multi-Mode Smart Servo

    Multi-Mode Smart Servo

    #75002
    $33.32
    (2052 En stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Specifications:

    Type:                             Metal Brush Motor
    Horn Gear Spline:       25T (5.9mm)
    Size:                               40mm x 20.1mm x 38.3mm
    Weight:                          65g
    Maximum Speed:        62RPM at 6V
    Stall Torque:                 20kg.cm at 6V
    Voltage:                         6-7 4V
    Cable:                             22AWG, 75cm

    Photo de 6mm D Shaft Low Profile Clamping Hub

    6mm D Shaft Low Profile Clamping Hub

    #76292
    $8.21
    (1641 En stock)

     

     

    Φ29.0mm*16.0mm thick
    6*M3 thread tapping through
    (including 2*M3 thread for M3 SHCS)
    Φ6.0mm D hole
    AL6061-T6

    Photo de 96mm U-Channel (2 pack)

    96mm U-Channel (2 pack)

    #76017-2
    $13.88
    (1041 En stock)

    The Studica U Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 48mm
    • Width - 48mm
    • Length - 96mm
    • Hole pattern - 2
    • Step File
    Photo de 60 Tooth GT2-6mm Timing Belt Pulley

    60 Tooth GT2-6mm Timing Belt Pulley

    #76453
    $15.27
    (456 En stock)

    The 60 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts. 

    Specifications:

    • 60 Tooth Timing Pulley
    • 6mm Bore 
    • Material: 6061 T6 Aluminum
    • Step File
    Photo de Anderson PowerPole to JST VH

    Anderson PowerPole to JST VH

    #am-3732
    $5.39
    (En stock)

    Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub.

    Connections:

    • JST VH
    • Anderson Power Pole
    Photo de 12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    #am-2590
    $10.00
    (20 En stock)

    This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches. 

    Specifications:

    • Weight: pounds
    • Length: Approximately 24 inches
    • Connector Type: Anderson PowerPole PP45
    • Gauge: 12 bonded

    Les clients ayant acheté cet article ont également acheté
    Photo de 6mm D Shape Collar Clamp

    6mm D Shape Collar Clamp

    #76320
    $6.93
    (1180 En stock)

    May be used with 6mm D-Shape Shaft to secure wheels in their position.
     

    Specifications:

    • Φ20.0mm*8.0mm thick
    • 1*M3 thread for M3 SHCS on the clamp side
    • Φ6.0mm D hole
    • AL6061-T6
    • Step File

     

    Photo de Clamping Shaft Hub - v2

    Clamping Shaft Hub - v2

    #76280
    $11.05
    (1146 En stock)

    Made of aluminum, the Studica Clamping Shaft Hub is used with flex and drive wheels 

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm ID
    • Hole pattern for connecting to structure
    • Step File 
    Photo de End Piece Plate (2 pack)

    End Piece Plate (2 pack)

    #76143-2
    $13.88
    (590 En stock)

    The Studica End Piece Plate is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

     

    Photo de #25 - 24 Tooth Sprocket (2 pack)

    #25 - 24 Tooth Sprocket (2 pack)

    #76226-2
    $15.27
    (1404 En stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Number of teeth: 24
    • Step File

    Photo de Multi-Mode Smart Servo

    Multi-Mode Smart Servo

    #75002
    $33.32
    (2052 En stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Specifications:

    Type:                             Metal Brush Motor
    Horn Gear Spline:       25T (5.9mm)
    Size:                               40mm x 20.1mm x 38.3mm
    Weight:                          65g
    Maximum Speed:        62RPM at 6V
    Stall Torque:                 20kg.cm at 6V
    Voltage:                         6-7 4V
    Cable:                             22AWG, 75cm

    Photo de 6mm D Shaft Low Profile Clamping Hub

    6mm D Shaft Low Profile Clamping Hub

    #76292
    $8.21
    (1641 En stock)

     

     

    Φ29.0mm*16.0mm thick
    6*M3 thread tapping through
    (including 2*M3 thread for M3 SHCS)
    Φ6.0mm D hole
    AL6061-T6

    Produits connexes
    Photo de WorldSkills Mobile Robotics Collection Shanghai 2022

    WorldSkills Mobile Robotics Collection Shanghai 2022

    #70201
    $3888.04
    (En stock)

    The WorldSkills Mobile Robotics Collection – Shanghai 2022 by Studica is the authorized collection for the WorldSkills Mobile Robotics Competition. Featuring the Studica VMX Robotics Controller for WorldSkills, the Titan Quad Motor Controller and Servo Power Block. This comprehensive Collection also includes electronics, accessories, motors, servos, mounts, U-Channel, mounting plates, flat brackets, irregular brackets, and flat beams. You'll also find gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. Includes Everything You Need (Over 1500 components).

    Download brochure and BOM

    Photo de Irregular Bracket Pack

    Irregular Bracket Pack

    #70262
    $262.54
    (0 En stock)

    Includes,

    • 3 - 120 Degree Bracket (2 pack)  76080-2
    • 2 - 90 Degree Bracket (2 pack)  76081-2
    • 2 - 135 Degree Bracket (2 pack)  76082-2
    • 2 - 96mm Adjustable Flat Bracket (2 pack)  76083-2
    • 1 - T Bracket (2 pack)  76084-2
    • 1 - X Bracket (2 pack)  76085-2
    • 4 - Inside U Bracket (2 pack)  76086-2
    • 4 - L Bracket (2 pack)  76087-2
    • 4 - Inside L Bracket (2 pack)  76089-2
    WorldSkills Mobile Robotics Junior Collection 2021

    WorldSkills Mobile Robotics Junior Collection

    #70301
    $3262.95
    (0 En stock)

    The WorldSkills Mobile Robotics Junior Collection by Studica is the authorized collection for the WorldSkills Asia Mobile Robotics Junior Competition. This comprehensive Collection includes over 1,400 items including controller, electronics, motors, structure, gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs.

    Photo de 120 Degree Bracket (2 pack)

    120 Degree Bracket (2 pack)

    #76080-2
    $18.04
    (1666 En stock)

    The 120 Degree Bracket is perfect for connecting two channel pieces at 120 degrees from each other. Each side is 48mm wide to fit perfectly on the channel. Use three brackets with 3 channel pieces to make 3 wheeled robots. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

     

     

    Photo de 90 Degree Bracket (2 pack)

    90 Degree Bracket (2 pack)

    #76081-2
    $9.71
    (2394 En stock)

    The 90 Degree Bracket is perfect for connecting two channels pieces at 90 angle from each other. Each side is 48mm wide to fit perfectly on the channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File
    Photo de 135 Degree Bracket (2 pack)

    135 Degree Bracket (2 pack)

    #76082-2
    $9.71
    (463 En stock)

    The 135 Degree Bracket is perfect for connecting two channels pieces at 45 degrees from each other. Each side is 48mm wide to fit perfectly on the channel. Used for intake systems, elevator systems, or structure where 45 degrees is required. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File
    Photo de 96mm Adjustable Flat Bracket (2 pack)

    96mm Adjustable Flat Bracket (2 pack)

    #76083-2
    $7.63
    (419 En stock)

    The Studica Adjustable Angle Flat Bracket is perfect for connecting two channels pieces together at various angles. It is 3mm thick and as with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 48mm
    • Length - 96mm
    • Step File
    Photo de T Bracket (2 pack)

    T Bracket (2 pack)

    #76084-2
    $13.88
    (810 En stock)

    The T Bracket is perfect for connecting two or three channels together. Each side is 48mm wide to fit on the U Channel, low profile channel or other brackets. The overall size is 144mm x 96mm

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

     

    Photo de X Bracket (2 pack)

    X Bracket (2 pack)

    #76085-2
    $19.43
    (851 En stock)

    The X Bracket is perfect for connecting four channels pieces together. Each of the 4 sections is 48mm wide and the overall dimmension is 144mm x 144mm.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File
    Photo de L Bracket (2 pack)

    L Bracket (2 pack)

    #76087-2
    $8.32
    (436 En stock)

    Made from 3mm thick heavy 6061-T6 Aluminum, the L Bracket is 48mm x 48mm and is used outside the U Channel or Low profile channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File
    Photo de Inside L Bracket (2 pack)

    Inside L Bracket (2 pack)

    #76089-2
    $8.32
    (863 En stock)

    Made from 3mm thick heavy 6061-T6 Aluminum, the Inside L Bracket is 42mm x 45mm and is used inside the U Channel or Low profile channel.As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File
    Informations
    Service Clients
    Mon compte
    Informations de contact
    Droit d'auteur et copie; 2024 Studica Limited. Tous les droits sont réservés.