Includes,
Our SpinTake has three bore options, making it a viable part for both FRC and FTC! This product is ideal as an intake "wheel" for picking up game pieces of varying shapes. Made from natural rubber, the SpinTake is flexible, yet firm. Its unique shape also allows it to be oriented to stay within the robot frame perimeter initially but can reach outside just by spinning. These work in a similar fashion to surgical tubing fingers on an axle, but are easier to implement and provide a cleaner look with more consistent results.
The Hex Bore options are designed to be an interference fit on their associated Hex Shafts. This means it will be a tight press to install but will resist slipping under load.
The Motor Mount Plate is used with the Maverick 12V DC Gear Motor (Part# 75001) to attach it inside the anyone of the U Channels 76010 to 76018. This is an example of a chassis with 4 motors mounted inside the U-Channel using a Motor Mounting Plate.
Specifications:
The 6mm Shaft hub is used to connect any Studica wheel and the Studica motor or any motor with a 6mm shaft.
TETRIX MAX Bevel Gear & Acetal Bearings includes two heavy-duty aluminum gears along with two acetal bearings that allow for the transfer of the direction of motion at 90 degrees.
This is a PWM cable, also known as a "servo extension cable." 22 gauge wire is used in these cables, and the body of the cable is jacketed with black heat shrink tubing. Notice that these are not 3-wire ribbon cables, like all other PWM cables. Universal servo connectors are on each end, with a female connector on one end and a male on the other.
The 6mm diameter D -Shaft is made of stainless steel and is used throughout our building system as drive components. The D-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.
Specifcation:
The D-Shaft Collar is 6mm ID and 12mm OD. The inside diameter will fit any of the D-Shaft axels.
Specifcations:
Material: 6061-T6 Aluminum
This 1mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm shaft. Mix and match various spacer lengths.
SPECIFICATIONS
The Flange Bearing 14mm OD fits any of the channel and flat brackets with the common hole pattern having a center hole of 14mm. The inside diameter will fit any of the D-Shaft axels.