Use the Collet Closer Foot Pedal Kit for hands-free operation of your lathe’s automatic collet closer

The Face Mill - 38 mm (1.50 in.) is a 4 flute indexable face/shell mill for profiling, facing, and general material removal

Neutral Hand Turning Tool. Includes wrenches and (1) insert.

• Designation: SDNCN 06-2J
• Insert Retention: Screw Type (S)
• Insert Shape: 55° (D)
• Approach Angle: 63° (N)
• Clearance Angle: 7° (C)
• Hand: Neutral (N)
• Shank Size: 0.375 in. (06)
• Insert I.C.: 1/4 in. (2)
• Tool Length: 3.5 in. (J)

Neutral Hand Turning Tool. Includes wrenches and (1) insert.

• Designation: SDNCN 06-2J
• Insert Retention: Screw Type (S)
• Insert Shape: 55° (D)
• Approach Angle: 63° (N)
• Clearance Angle: 7° (C)
• Hand: Neutral (N)
• Shank Size: 0.375 in. (06)
• Insert I.C.: 1/4 in. (2)
• Tool Length: 3.5 in. (J)

TTS - 1/2 in. Set Screw Holder.

The 4 in. Precision 4-Jaw Chuck (5C Mount) is an independent 4-Jaw chuck 4 in. diameter with 5C Arbor Mount and includes inside and outside jaws

Independent 4-Jaw chuck.  4 in. Diameter with 5C Arbor Adaptor.

• Diameter: 4 in.
• Thru Hole Size: 1"
• Taper: 5C (includes arbor adapter)
• Hardened Scroll Plate
• Includes inside and outside jaw sets, Chuck Key, and wooden box

Carbide Insert for Aluminum and Plastic - Face & End Mills

This kit includes all the toolholders, pull studs, collets, wrenches and tightening fixture needed to get started with your 24R ISO20 ATC. Also, it is designed to hold all of the cutting tools in the Starter Cutting Tool Kit by Amana (50470). So you can spend more time making parts and less time changing bits.

Replacement support slats are galvanized mild steel and measure 88mm wide by 3mm thick. Length measures 1280mm for the 1300PL. Slats are sold in a kit of 14.

Right Hand Grooving Tool - SGTHR 9.5-3

Right Hand Grooving Tool.  Includes 1 GTN-3 insert.

• Hand: Right (R)
• Shank Size: 0.375 in. (9.5)
• Insert: GTN-3
• Maximum cutoff diameter: 1.1 in.

The TTS™ Gauge Holder: 12 mm is a TTS™ 12 mm low profile holder

This powerful 1HP Dust Collector not only protects your health but also the precision spindle bearings by removing dust at the source and not just from the enclosure after it has contaminated the bearings.

It runs on 115VAC and moves up to 660 cfm and features a 30 micron bag filter.

The 5C Serrated Collet Set (5 Pcs.) is a 5 piece 5C serrated collet set that covers 1/2 in. to 1 in. (1/8 in. increments)

5 Piece 5C Serrated Collet Set.

• Covers 1/2 in. to 1 in. (1/8 in. increments)
• Steel, hardened and precision ground

Package of 10 Carbide Insert - Face & End Mills

Seeing a need for a cutting fluid that would not cause harmful health effects, LubeCorp set out on a journey which led to the creation of GreenCut Cutting Fluid.

GreenCut packs top notch cutting ability and remains completely safe!

GreenCut Cutting Fluid provides excellent performance in extreme temperatures and pressures:

• 100% effective regardless of the tool speed or feed.
• Originally certified under Environment Canada’s EcoLogo program.
• Eliminates sump odors permanently.
• Easy on the hands and helps heal lacerations and dermatitis.
• Vapors won’t cause asthma or breathing problems.
• Immediate biodegradation of up to 5% of oil wastes means no stench and extended service life.

Seeing a need for a cutting fluid that would not cause harmful health effects, LubeCorp set out on a journey which led to the creation of GreenCut Cutting Fluid.

GreenCut packs top notch cutting ability and remains completely safe!

GreenCut Cutting Fluid provides excellent performance in extreme temperatures and pressures:

• 100% effective regardless of the tool speed or feed.
• Originally certified under Environment Canada’s EcoLogo program.
• Eliminates sump odors permanently.
• Easy on the hands and helps heal lacerations and dermatitis.
• Vapors won’t cause asthma or breathing problems.
• Immediate biodegradation of up to 5% of oil wastes means no stench and extended service life.