Spacers & Washers | Studica Canada - Robotics, Automation Technology for Education and Industry

1/2 in. ID Black Nylon Washer

#am-1001

$0.49

(In stock)

Nylon washer with a 1/2 in. inside diameter.

This item can only be purchased in multiples of 10

Specifications

Inside Diameter: 0.505 in.
Material: Nylon
Outside Diameter: 0.750 in.
Thickness: 0.062 in.

0.192 in. ID 0.375 in. OD 1.5 in. Long Aluminum Spacer

#am-1599

$3.50

This spacer is made of aluminum and is 1.5 in. long. It is used in the Climber in a Box.

Specifications

Inside Diameter: 0.192 in.
Length: 1.5 in.
Material: Aluminum
Outside Diameter: 0.375 in.

0.192 in. ID 0.375 in. OD 2 in. Long Aluminum Spacer

#am-1600

$4.00

(7 In stock)

This spacer is made of aluminum and is 2 in. long. It is used in the Climber in a Box.

Specifications

Inside Diameter: 0.192 in.
Length: 2 in.
Material: Aluminum
Outside Diameter: 0.375 in.

0.192 in. ID 0.375 in OD 1.0 in. Long Aluminum Spacer

#am-3876

$2.75

This spacer is used in the AM14U Family Vertical Battery Mount Kit (am-3964a) But is a great spacer for #10 screws wherever you might need it.

Specifications

Inside Diameter: 0.192 in.
Length: 1 in.
Material: Aluminum
Outside Diameter: 0.375 in.
Wall Thickness: 0.09 in.

0.192 in. ID 0.3125 in. OD 2 in. Long Aluminum Spacer

#am-1582

$5.00

Hex Molded Spacers, 1/2 Hex Bore, 1 inch length

#am-3948-1000

$1.25

Whether you are building an elite custom drivetrain or a championship manipulator, you need your components to stay where they're supposed to. These lightweight spacers come in 3/8", 1/2", and 5 mm hex bores to accommodate the most common shaft types They can also be used on round shafts and bolts (5mm is great for #10 hardware!). If you need to space a lot grab some 1" spacers. If you need ultimate precision pick up some 0.063" spacers. Not sure which spacers you need? Keep a handful of all six sizes in your shop and never go hungry for spacers again!

These spacers are molded in black polycarbonate, a tough, crack resistant material that FIRST teams are familiar with. These spacers should resist stress cracking. If polycarbonate isn't rugged enough for your high load application or you need custom length spacers, check out our Aluminum Hex Spacer Extrusion.

Specifications

Inside Diameter: 0.375 in. Hex, 0.50 in. Hex, 5 mm Hex
Length: 0.063 in., 0.125 in., 0.188 in., 0.250 in., 0.375 in., 0.50 in., 1.00 in.
Material: Polycarbonate
Outside Diameter: 0.787 in. Round
Weight: Up to 0.014 lbs

Hex Molded Spacers, 1/2 Hex, 0.5 inch length

#am-3948-500

$1.25

Whether you are building an elite custom drivetrain or a championship manipulator, you need your components to stay where they're supposed to. These lightweight spacers come in 3/8", 1/2", and 5 mm hex bores to accommodate the most common shaft types They can also be used on round shafts and bolts (5mm is great for #10 hardware!). If you need to space a lot grab some 1" spacers. If you need ultimate precision pick up some 0.063" spacers. Not sure which spacers you need? Keep a handful of all six sizes in your shop and never go hungry for spacers again!

These spacers are molded in black polycarbonate, a tough, crack resistant material that FIRST teams are familiar with. These spacers should resist stress cracking. If polycarbonate isn't rugged enough for your high load application or you need custom length spacers, check out our Aluminum Hex Spacer Extrusion.

Specifications

Inside Diameter: 0.375 in. Hex, 0.50 in. Hex, 5 mm Hex
Length: 0.063 in., 0.125 in., 0.188 in., 0.250 in., 0.375 in., 0.50 in., 1.00 in.
Material: Polycarbonate
Outside Diameter: 0.787 in. Round
Weight: Up to 0.014 lbs

Hex Molded Spacers, 1/2 Hex, .063 Thick

#am-3948-063

$0.90

(101 In stock)

These spacers are molded in black polycarbonate, a tough, crack resistant material that FIRST teams are familiar with. These spacers should resist stress cracking. If polycarbonate isn't rugged enough for your high load application or you need custom length spacers, check out our Aluminum Hex Spacer Extrusion.

0.252 in. ID 0.625 in. OD 2.750 in. Long Nylon Spacer

#am-1607

$3.50

(0 In stock)

Specifications

Bore: 0.252 in. [6.4 mm] Round
Inside Diameter: 0.252 in. [6.4 mm]
Length: 2.750 in. [69.9 mm] (2-3/4)
Material: Nylon
Outside Diameter: 0.625 in.

0.194 in. ID 0.375 in. OD 1.000 in. Long Nylon Spacer

#am-1696

$1.00

(44 In stock)

This Nylon spacer is 1 inch long and has an inside diameter of 0.194 inches.

Specifications

Inside Diameter: 0.194 in. [4.9 mm]
Length: 1.000 in. [25.4 mm]
Material: Nylon
Outside Diameter: 0.375 in. [9.5 mm] (3/8)

0.313 in. ID 0.438 in. OD 0.188 in. Long Aluminum Spacer

#am-1689

$1.75

(4 In stock)

This Aluminum spacer is 0.188 inches long and has an inside diameter of 0.313 inches.

Specifications

Inside Diameter: 0.313 in. [7.9 mm] (5/16)
Length: 0.188 in. [4.8 mm]
Material: Aluminum
Outside Diameter: 0.438 in. [11.1 mm]

0.319 in. ID 0.438 in. OD 0.313 in. Long Aluminum Spacer

#am-1678

$2.25

(4 In stock)

This aluminum spacer is 0.313 inches long and has an outer diameter of 0.438 inches.

Specifications

Bore: 0.319 in. [8.1 mm] Round
Inside Diameter: 0.319 in. [8.1 mm]
Length: 0.313 in. [7.9 mm] (5/16)
Material: Aluminum
Outside Diameter: 0.438 in. [11.1 mm]