Close
Main Categories
    Filters
    Preferences
    Search

    Spacers & Washers

    Spacers & Washers

    View as Grid List
    Sort by
    Display per page

    Plate Spacer for RAW Box

    #am-2359
    $15.38
    (In stock)

    The Plate spacer goes on the opposite side of the RAW box from the CIM Motor. 

    Specifications:

    • Material: 6061 Aluminum
    • Length: 3.5"
    • Height: 1"
    • Thickness: 0.312"
    • Weight: 0.07 Pounds

    PVC Spacer, 2.425" x .602 Bore

    #am-3544
    $4.61
    (In stock)

    This PVC Spacer is used in the mecanum upgrade kits for the AM14U3.

    Specifications:

    • Material: PVC
    • Inside diameter: 0.602 inch
    • Outside diameter: 0.840 inch
    • Thickness: 2.425 inch

    Shim Washer for 5/8 in. Diameter Shoulder Screw

    #am-1444
    $1.16
    (In stock)

    This shim washer is used for the 1:1 LJ BevelBox. It positions the 1/2 in. hex bore miter gear (am-3772) on the output shaft to mesh properly with the 8 mm keyed miter gear (am-3776) from a CIM motor or a 1/2 in. hex bore miter gear (am-3772) on a 57 Sport or CIM Sport planetary gearbox. 

    Specifications:

    • Material: Stainless Steel
    • Inside Diameter: 0.625 in.
    • Outside Diameter: 0.875 in.
    • Thickness: 0.016 in.
    • For Screw Size: 1/2 in.
    • For Shoulder Diameter: 5/8 in.

    Sonic Gearbox Spacer

    #am-2508
    $12.30
    (In stock)

    This is an extruded spacer used in the Sonic Shifter. Two of these are used to space out the Motor Plate and Shaft Plate on each Sonic Shifter.

    Specifications:

    • Material: 6005-T6 Aluminum
    • Length: 2.00 inches
    • Width: 5.00 inches
    • Thickness: 0.565 inch
    • Weight: 0.16

    Spacer, .188 in. thick, 1/2" Hex Bore

    #am-3948-188
    $1.00
    (49 In stock)

    Specifications:

    • Material: Acetal
    • Inside Diameter: 0.510" Hex
    • Outside Diameter: 0.768"
    • Thickness: 0..188"

    Spacer, .375 in. thick, 1/2" Hex Bore

    #am-3948-375
    $1.00
    (49 In stock)

    Specifications:

    • Material: Acetal
    • Inside Diameter: 0.510" Hex
    • Outside Diameter: 0.768"
    • Thickness: 0..375"

    Spacer, 1/16" thick, 1/2" Hex Bore [Qty-10]

    #am-1364
    $9.23
    (In stock)

    Specifications:

    • Quantity: 10
    • Material: Acetal
    • Inside Diameter: 0.510" Hex
    • Outside Diameter: 0.768"
    • Thickness: 0.0625"

    Spacer, 1/4" thick, 1/2" Hex Bore

    #am-3948-250
    $9.23
    (In stock)

    Specifications:

    • Material: Acetal
    • Inside Diameter: 0.510" Hex
    • Outside Diameter: 0.768"
    • Thickness: 0.25"

    Spacer, 1/4" thick, 1/2" Hex Bore - copy

    #am-3948-250
    $9.23
    (In stock)

    Specifications:

    • Material: Acetal
    • Inside Diameter: 0.510" Hex
    • Outside Diameter: 0.768"
    • Thickness: 0.25"

    Spacer, Aluminum, 0.242" id, 0.50" od x 0.354"

    #am-3426
    $1.54
    (In stock)

    This aluminum spacer makes up part of the hardware included in a TileRunner and PicoBox Series of gearboxes.

    Specifications:

    • OD: 0.5"
    • ID: 6.15mm
    • Length: 9mm
    • Material: Aluminum

    Spacer, Aluminum, 0.382 in. ID 0.75 in OD 1.0 in Long

    #am-1450
    $3.08
    (In stock)

    Specifications:

    • Length: 1 in.
    • Outside diameter: 0.75 in.
    • Inside diameter: 0.382 in.
    • Material: 6061-T6 Aluminum
    • Weight: 0.81 Pounds

    Spacer, Aluminum, 0.87" id, 0.935" od, 0.50" long

    #am-2114
    $4.61
    (In stock)

    This aluminum sleeve is used inside the Wormbox am-0917.

    Specifications:

    • Length: 0.50"
    • Inner Diameter: 0.870"
    • Outer Diameter: 0.935"
    • Material: 6061 Aluminum

    Spacer, Aluminum, 1/4 id, 5/16 od x 1/4 long

    #am-3424
    $1.54
    (In stock)

    This aluminum spacer makes up part of the hardware included in a TileRunner.

    Specifications:

    • OD: 0.3125"
    • ID: 0.257"
    • Length: 0.25"
    • Material: Aluminum

    Spacer, Aluminum, 1/4" id, 3/8" od, 0.59" long

    #am-1290
    $2.31
    (In stock)

    Specifications:

    • OD: 3/8"
    • ID: 0.257"
    • Length: 19/32"
    • Material: Aluminum

    Spacer, Aluminum,0.242" id, 0.315" od, 0.59" long

    #am-3425
    $2.31
    (In stock)

    This aluminum spacer makes up part of the hardware included in a TileRunner.

    Specifications:

    • OD: 8mm
    • ID: 6.15mm
    • Length: 15mm
    • Material: Aluminum

    Spacer, Nylon, 1/2" id, 0.62" od, 1/2" long

    #am-2360
    $1.54
    (In stock)

    This is the spacer for the 39 Tooth HTD Plastic Drive Pulley Kit

    Specifications:

    • Material: Nylon
    • ID: 0.5"
    • OD: 0.61"
    • Length: 0.5"
    • Weight: 0.004 lbs.