TETRIX MAX Gear Hub Spacers provides adequate spacing between wheels and gears. Includes four cap screws for each spacer.
Create a variety of attachment surfaces with these sturdy, aluminum, 2 mm thick building plates. Great for creating new ways to connect and combine all of the Tetrix Prime; components
TETRIX MAX Bronze Bushings are greased to reduce friction.
Create a variety of attachment surfaces with these sturdy, aluminum, 2 mm thick building plates. Great for creating new ways to connect and combine all of the Tetrix Prime; components.
Axle Set Collars lock a rotating axle to secure the horizontal alignment.
Create a variety of attachment surfaces with these sturdy, aluminum, 2 mm thick building plates. Great for creating new ways to connect and combine all of the Tetrix Prime; components.
TETRIX MAX Pivot Bearing is a replacement pivot bearing for all TETRIX pivot arms and brackets.
Create a variety of attachment surfaces with these sturdy, aluminum, 2 mm thick building plates. Great for creating new ways to connect and combine all of the Tetrix Prime; components
Tetrix Max 6-32 Nut-W Pack feature a star washer that locks down on the heavy-duty aluminum structural elements for added strength to any TETRIXrobot design.
Create a variety of attachment surfaces with these sturdy, aluminum, 2 mm thick building plates. Great for creating new ways to connect and combine all of the Tetrix Prime; components.
6-32 1/2 Socket Head Cap Screws connect your robot design. Requires hex keys, sold separately, to tighten and loosen the screws.
Create a variety of attachment surfaces with these sturdy, aluminum, 2 mm thick building plates. Great for creating new ways to connect and combine all of the Tetrix Prime; components.
6-32 5/16 Socket Head Cap Screws connect your robot design. Requires hex keys, sold separately, to tighten and loosen the screws.
These sturdy aluminum gussets are used to connect structural components at different angles and to provide additional strength where needed. Available in 60-, 90-, and 120-degree angles, these gussets serve as a great way to expand building options and increase the strength and robustness of your robot builds!
1/8L Shaft Spacer Pack is handy when you need a little space between wheels, gears, and other elements on axles.
These sturdy aluminum gussets are used to connect structural components at different angles and to provide additional strength where needed. Available in 60-, 90-, and 120-degree angles, these gussets serve as a great way to expand building options and increase the strength and robustness of your robot builds!
Axle Spacers are handy when you need a little space between wheels, gears, and other elements on axles.
These sturdy aluminum gussets are used to connect structural components at different angles and to provide additional strength where needed. Available in 60-, 90-, and 120-degree angles, these gussets serve as a great way to expand building options and increase the strength and robustness of your robot builds!
6-32 1" Stand-off Posts are hex stand-offs; female/female, 6-32.
The Anchor Block is a versatile connection element that allows connections between plates, linkages, or beams from all six surfaces. Made of acetal plastic; requires Thumbscrews, sold separately.
6-32 2" Stand-off Posts are hex stand-offs; female/female, 6-32.
Tetrix Max Hex Key Pack comes with all four sizes of Hex Keys needed for TETRIX hex pieces. Includes one each of 7/64", 3/32", 1/16", and 5/64" keys.
TETRIX MAX Stand-off Posts is a package of 12 hex stand-off posts; female/female, 6-32.
Expand the horizons of your TETRIX PRIME R/C Starter Set. Engineer bigger, more advanced robots, increase the robustness of builds, and combine all the Tetrix Prime; components using the additional parts and pieces included in the Tetrix Prime; Expansion Set.
The Tetrix Prime; Expansion Set comes with three major parts that will provide students more design options for their robots:
6-32 3/8 Button Head Cap Screws feature a low-profile head – great for areas where moving parts are close to the screw heads. Requires hex keys, sold separately, to tighten and loosen the screws.
These plastic spacer/bushings are used in conjunction with 6 mm axles to keep your mechanisms and wheels running smoothly. Can also be used as a 2 mm spacer between metal surfaces.
TETRIX MAX Lego Connector Pack was designed to enable LEGO Technic elements to be connected to theTetrix Max; metal building system.
The TETRIX PRIME Getting Started Package offers the ultimate robotics experience. Teams of two work to design fully functioning, remote-controlled robots, with each student pair having access to both a Tetrix Prime; R/C Starter Set and a Tetrix Prime; Expansion Set. The included Instructional Build DVD for Tetrix Prime; Robotics and Engineering Design Loop Poster Set provide an added bonus to the builder’s guides.
The Getting Started Package includes:
Tetrix Max Multi-Nut Pliers are designed to hold nuts, while bolts are tightened. The long, narrow neck reaches into tight places. Great for building TETRIX robots.
TETRIX PULSE is a programmable robotics controller specifically developed for the Tetrix Prime; system that is powerful yet easy to use and, when combined with the TETRIX Ardublockly software and Arduino Software (IDE), can provide an ideal learning tool for teaching graphic or syntax-based coding.
TETRIX Ardublockly is drag-and-drop block-based graphic coding software used to program the PULSE controller. In addition, the PULSE controller can be programmed with a syntax-based coding method using the Arduino Software (IDE) and the PULSE Arduino Library.
The TETRIX PULSE Robotics Controller features the following:
16 Tooth HUB Sprocket Pack is made from heavy-duty aluminum for maximum performance under heavy loads. TETRIX sprockets are available in three different ratios and designed to work with the 0.250" TETRIX steel chain. Sold in packages of two.
This set has everything you need to turn a TETRIX PRIME R/C Robotics Set into a Tetrix Prime; Programmable Robotics Set.
Includes:
TETRIX MAX Sprocket Pack is made from heavy-duty aluminum for maximum performance under heavy loads. TETRIX sprockets are available in three different ratios and designed to work with the 0.250" TETRIX steel chain. Sold in packages of two.
This set includes what you need for students to start building programmable robots with the TETRIX PULSE Robotics Controller.
Includes:
32 Tooth Sprocket Packs are made from heavy-duty aluminum for maximum performance under heavy loads. TETRIX sprockets are available in three different ratios and designed to work with the 0.250" TETRIX steel chain. Sold in packages of two.
This set includes everything you need for students to start building remote-controlled and autonomous-controlled robots with the TETRIX PRIME system.
Includes:
Axle Hubs are used to attach gears and wheels to axles and axles to structural elements. Features heavy-duty aluminum construction.
Chain with Links is made to work with all ratios of sprockets. The chain pack includes five feet of 0.250" steel chain and four master connecting links. TETRIX chain can easily be cut to custom lengths using the Chain Breaker Tool, sold separately.
TETRIX MAX Sprocket and Chain Pack is made from heavy-duty aluminum for maximum performance under heavy loads. TETRIX chain is a 0.250" steel chain packaged in five-foot lengths.
Tetrix Max Switch Mounting Bracket is made of black acrylic and enables the On/Off Switch to be easily mounted onto TETRIX components.
TETRIX MAX Continuous Rotation Servo enables precise movements of robot designs. Unlike other servos that have a limited range of motion, this servo rotates continuously in either direction – as needed for wheels. This high-quality servo is designed with a wide neutral dead band to eliminate the “creep” that occurs in many other continuous rotation servos. Dual ball bearings on the output shaft ensure long-lasting performance.
Note: This servo does not have position feedback.
TETRIX MAX Tube Reinforcers Pack are inserted into the end of TETRIX Tubes for reinforcement when applying a TETRIX Tube Clamp.
1 1/2" Screw Pack help connect components of your robot design. Requires hex keys, sold separately, to tighten and loosen the screws.
485 Servo Pack is one of the best choices for rugged robotic applications. This servo’s great performance and durability are a combination of karbonite gears, high-performance circuitry, and a ball bearing-supported output shaft. Karbonite gearing is nearly four times stronger than nylon gears and provides virtually wear-free performance. Standard rotational range is 90 degrees, but it can be operated to 180 degrees with controllers capable of generating a pulse range from 600 usec to 2400 usec. Produces nearly 84 oz-in of torque power.
Tetrix Max Tank Tread Accessory Pack includes 24 tread conveyor paddles and 50 tread rubber inserts.
TETRIX MAX Inside C Connectors help to create perpendicular joints when space is tight. This can be placed facing out of the end or the open side of the channel. The connector is very strong as it attaches to two sides of the structural element.
Tetrix Max Flat 288 MM create added versatility whether you’re making a flat surface or creating a scoop or other angled piece. The elements come in four lengths, and you can shape them into various angles using a metal-bending tool, sold separately. Create rails, braces, brackets, gussets, and other custom pieces with ease.
Tetrix Max Flat 160 MM create added versatility whether you’re making a flat surface or creating a scoop or other angled piece. The elements come in four lengths, and you can shape them into various angles using a metal-bending tool, sold separately. Create rails, braces, brackets, gussets, and other custom pieces with ease.