Peanut Extrusion, 36"Blue (am-3090-3_blue)

Peanut Extrusion is an easy to use structure. The profile of the extrusion looks like a peanut and has two holes that are perfect for a 1/4-20 thread-forming screw. The added mid spans are positioned to flank a pair of bolts that self thread into the adjoining peanut extrusion. These spans prevent the peanut from getting crushed by over tightening the bolts. The advantages of Peanut Extrusion are the ease of creating rigid corner joints and the closed profile of the extrusion that prevents dust build up. Whether you are making a table in your shop or a strong frame for a robot, this extrusion is the one for you!

Specifications:

Wall Thickness: 0.050 in.
Width: 1.0 in.
Height: 1.0 in.
Length: Selectable Above (+/- 1")
Hole Size: Sized for 1/4-20 Thread-Forming Screw
Material: 6063-T6 Aluminum
Weight Per Inch: 0.027 Pounds
Weight Per Foot: 0.325 Pounds

MFR Part #: am-3090-3_blue

$29.00

Availability: 7 in stock

Qty:

Reviews

Write your own review

Product can be reviewed only after purchasing it
Only registered users can write reviews

Review title:

Review text:

Rating:

Bad
Excellent

Also Purchased

1/2" Churro, Blue 3 FT /- 0.125" (am-3101-3_Blue)

#AM-3101-3_BLUE

$25.00

(4 In stock)

Churro is a versatile extruded aluminum hex profile. The outside of this part is a 1/2 in. hex with small concave dimples which act as weight savings. There is an inside hole is sized at 0.2 in. in order to fit 1/4-20 thread forming screws. No tapping or threading is needed, as long as a thread forming screw is used. The outside hex size fits a 1/2 in. wrench or socket.

The 3-foot churro, our most popular length and the best value on shipping, is available anodized in red, blue, purple, gold and black to dress up your robot. Anodized finish is hardy and doesn't flake off or add thickness like paint, but it is possible for a scratch to expose the bare metal beneath. Take basic precautions in your shop like watching for sharp tools or overtightening this churro in a vise.

Specifications:

Material: 6005A Aluminum
Inside diameter: 0.231 in.
Outside width: 0.495 in. Hex, across flats
Length: Selectable Above
Weight: 0.16 lbs/ft

Pigeon 2.0

#am-3556a

$355.00

(0 In stock)

Pigeon is an IMU with 9 degrees of freedom, containing a 3-axis magnetometer, accelerometer, and gyro. The gyro has built-in temperature compensation. Pigeon provides a heading by sensor fusing all 9 measurements. It can be connected to the Talon SRX for power and communication via UART, or it can be wired to the CAN bus while powered from a separate 12V source. Pigeon has built-in compass compensation for hard-iron, soft-iron, and physical tilt. The Pigeon 2.0 eliminates the need for on-boot calibration and temperature calibration and does not require stillness upon boot-up.

Customers who bought this item also bought