Gears
Specifications:
Specifications:
This is Dog Gear used within the AM Shifters and Super Shifters. It is
shipped with a strong, solid body #4-40 screw. The dog gear has a pocketed hole
for the head of a 4-40 screw and on the opposing side are threads to match.
Specifications:
This product uses a dog gear for shifting gearboxes. The mating dog gear can be found here.
Specifications:
This product uses a dog gear for shifting gearboxes. The mating dog gear can be found here.
Specifications:
This gear is the CIM gear for the Toughbox and Toughbox Mini.
Specifications:
The purpose of this gear is to be located on the shifting shaft of an AndyMark transmission (AM Shifter, Super Shifter). It is to be paired with a 28 (tooth) Small Output Gear. This is not a standard gear shipped with AndyMark transmissions. It is an optional part, as is the 28 Small Output Gear. The 28 Small Output Gear and the 35 Medium Cluster gear replace the standard set of Small Output Gear (35 tooth) and Medium Cluster Gear (28 tooth) on AndyMark transmissions.
Specifications:
Gear Ratios:
35 Medium Cluster Gear : 28 Small Output Gear --> 4:1 ratio between high and low gear on an AndyMark transmission (AM Shifter, Super Shifter). The standard ratio for these same transmissions are 2.56:1. This gear provides a TALLER ratio between high and low gear on these transmissions
Specifications:
Number of teeth: 50
Diametral pitch: 20
Pressure angle: 14.5 degrees
Pitch Diameter: 2.5 inch
Face width: 0.375 inch
Overall width: 0.400 inch
Bore: 0.377 inch hex hole
Material: 4140 steel, cold formed into gear teeth
Weight: 0.431 lbs.
This is the 50 tooth gear in the Toughbox, and has a 1/2 inch hex bore.
Specifications:
This is the 14 tooth gear in the Toughbox which has a 3/8 inch hex bore.
Specifications:
This gear can be used in the Toughbox, replacing the 14 tooth small cluster gear. It would be paired with a 45 Tooth Large Output Gear, in order to increase the output speed of the Toughbox.
Standard Toughbox output reduction: 12.76:1
Using this gear and a 45 Tooth Large Output Gear yields an 8.45:1 ratio.
Specifications:
This gear can be used in the Toughbox, replacing the 14 tooth small cluster gear. It would be paired with a 40 Tooth Large Output Gear, in order to increase the output speed of the Toughbox®. When using this cluster gear you may want to add the 3/16 Thick Nylon Spacer (am-1181) to the shaft. This gear is narrower than the standard Toughbox cluster gear and the spacer fills the gap
Standard Toughbox output reduction: 12.76:1
Using this gear and a 40 Tooth Large Output Gear yields a 5.95:1 ratio.
Specifications:
This gear can be used in the used in the Toughbox series gearboxes, replacing the 50 Tooth Large Output Gear. It would be paired with a 19 Tooth Small Cluster Gear, in order to increase the output speed of the Toughbox.
Standard Toughbox output reduction: 12.75:1
New Toughbox output reduction, using this gear and a 19 Tooth Small Cluster Gear: 8.45:1
Specifications:
This gear is used on the Super Shifter, as the standard gear for the final stage. It is paired with the 20 Tooth Gear 500 Key Bore.
Specifications: