This is a Gates HTD timing belt, manufacturer part number 800-5M-15

Usage: Axle Locations for AM14U Variations

Specifications:

• Number of Teeth: 160
• Pitch Length: 31.50 inches (800 mm)
• Width: 15mm
• Tooth profile: 5mm pitch HTD
• Kevlar reinforced
• Weight: 0.1 pounds

This is a Gates HTD timing belt, manufacturer part number 850-5M-15

Usage: Axle Locations for AM14U Variations 

Specifications:

• Number of Teeth: 170
• Pitch Length: 33.46 inches (850 mm)
• Width: 15mm
• Tooth profile: 5mm pitch HTD
• Kevlar reinforced
• Weight: 0.1

This is a Gates HTD timing belt.

Specifications:

• Number of Teeth: 40
• Pitch Length: 7.87 inches
• Pitch: 5mm
• Width: 9mm
• Tooth profile: 5mm pitch HTD
• Weight: 0.1 lbs

Specifications:

• Number of Teeth: 45
• Pitch Length: 8.86 inches (225mm)
• Pitch: 5mm
• Width: 9mm
• Tooth profile: 5mm pitch HTD
• Weight: 0.1

Specifications:

• Pitch: 5 mm
• Length:
• Width: 9 mm
• Number of Teeth: 48
• Weight: 0.05 Pounds

This is an HTD timing belt.

Specifications:

• Number of Teeth: 48
• Pitch Length: 9.44" (240mm)
• Pitch: 5mm
• Width: 9mm
• Tooth profile: 5mm pitch HTD
• Weight: 0.1

Specifications:

• Number of Teeth: 93
• Pitch Length: 18.31 inches (465mm)
• Pitch: 5mm
• Width: 9mm
• Tooth profile: 5mm pitch HTD

This is a Gates HTD timing belt, manufacturer part number 585-5M-15. This belt is used in the AM-14U-CS and AM-14U-8W as one of the two belts to connect an eight wheel drive.

Specifications:

• Number of Teeth: 117
• Pitch Length: 23.03 inches (585 mm)
• Width: 15mm
• Tooth profile: 5mm pitch HTD
• Kevlar reinforced
• Weight: 0.1

This is a Gates HTD timing belt, manufacturer part number 655-5m-15

Usage: 
Axle Locations for AM14U Variations (.pdf)

Specifications:

• Number of Teeth: 131
• Pitch Length: 25.79 inches (655 mm)
• Width: 15mm
• Tooth profile: 5mm pitch HTD
• Kevlar reinforced
• Weight: 0.1

This is a Gates HTD timing belt, manufacturer part number 425-5M-15
 

This robust 5mm HTD 18mm wide aluminum pulley is a lightweight motion component thoughtfully designed specifically for FIRST Robotics Competition robots. It features a lightweight 2024 aluminum core, made from our 24 Tooth Aluminum Pulley Stock. Unlike other products on the market, this pulley uses super strong steel flanges that are formed onto the pulley body instead of using a traditional press fit or crimps for maximum flange retention and durability. This pulley has small bosses on each side that allow them to be installed against an FR8ZZ Round or FR8ZZ Hex bearing without rubbing on the outer races for smooth operation. 

This version of the pulley supports either two 9mm wide belts or one 15mm wide belt. 

Specifications

• Belt Profile: 5 mm pitch HTD timing belt
• Bore: 0.5 in. Hex
• Flange Diameter: 1.63 in.
• Material: Aluminum
• Outside Diameter: 1.46 in.
• Pitch Diameter: 1.504 in.
• Teeth: 24
• Weight: 0.119 lbs
• Width: 0.8 in.

These are all of our 9 mm wide 5 mm pitch HTD synchronous timing belt offerings. All of these belts are a composite of flexible rubber with a fiberglass tensile member throughout. Synchronous timing belts, also known as a toothed belt or synchronous belt, are designed to eliminate slippage and keep any number of objects rotating at a constant rate. We offer both genuine Gates brand belts as well as lower-cost generic brand belts. 

Current Belt Offerings

Parts are organized by the following scheme: (Tooth Count - Trade Number - AndyMark part number)

Gates Brand Belts

• 48T - 240-5M-09 - am-3274
• 60T - 300-5M-09 - am-4659

Generic Brand Belts

• 40T - 200-5M-09 - am-3272
• 45T - 225-5M-09 - am-3273
• 48T - 240-5M-09 - am-3662
• 70T - 350-5M-09 - am-4359
• 93T - 465-5M-09 - am-3378

These are all of our 9 mm wide 5 mm pitch HTD synchronous timing belt offerings. All of these belts are a composite of flexible rubber with a fiberglass tensile member throughout. Synchronous timing belts, also known as a toothed belt or synchronous belt, are designed to eliminate slippage and keep any number of objects rotating at a constant rate. We offer both genuine Gates brand belts as well as lower-cost generic brand belts. 

These are all of our 15 mm wide 5 mm pitch HTD synchronous timing belt offerings. All of these belts are a composite of flexible rubber with a fiberglass tensile member throughout. Synchronous timing belts, also know as a toothed belt or synchronous belt, are designed to eliminate slippage and keep any number of objects rotating at a constant rate. We offer both genuine Gates brand belts as well as lower cost generic brand belts.

These are all of our 9 mm wide 5 mm pitch HTD synchronous timing belt offerings. All of these belts are a composite of flexible rubber with a fiberglass tensile member throughout. Synchronous timing belts, also known as a toothed belt or synchronous belt, are designed to eliminate slippage and keep any number of objects rotating at a constant rate. We offer both genuine Gates brand belts as well as lower-cost generic brand belts. 

These are all of our 9 mm wide 5 mm pitch HTD synchronous timing belt offerings. All of these belts are a composite of flexible rubber with a fiberglass tensile member throughout. Synchronous timing belts, also known as a toothed belt or synchronous belt, are designed to eliminate slippage and keep any number of objects rotating at a constant rate. We offer both genuine Gates brand belts as well as lower-cost generic brand belts. 

Current Belt Offerings

Parts are organized by the following scheme: (Tooth Count - Trade Number - AndyMark part number)

Gates Brand Belts

• 48T - 240-5M-09 - am-3274
• 60T - 300-5M-09 - am-4659

Generic Brand Belts

• 40T - 200-5M-09 - am-3272
• 45T - 225-5M-09 - am-3273
• 48T - 240-5M-09 - am-3662
• 70T - 350-5M-09 - am-4359
• 93T - 465-5M-09 - am-3378
• 105T - 525-5M-09 - am-3850