Close
Main Categories
    Filters
    Preferences
    Search

    Bearings

    Bearings

    View as Grid List
    Sort by
    Display per page

    Self-Lubricated Bearing .25 id x .25" long

    #am-0603
    $1.54
    (In stock)

    This self-lubricated bearing is used as bushings for the Rubber Rollers on the 6" Mecanum SR Wheels and 8" Mecanum HD Wheels.

    Specifications:

    • Structure material: steel
    • Lubrication material: TPFE, located on the inside diameter
    • Weight: 0.002 pounds
    • Length: 0.25"
    • Inner Diameter: 0.25"
    • Outer Diameter: 0.315"

    Thrust Bearing, needle roller 5/16" id, 3/4" od, 5/64" thick

    #am-2345
    $6.15
    (In stock)

    Product Overview: 

    • Thrust bearing, 5/16 inch inside diameter
    • This bearing is designed to be positioned between two 5/16" Flat Washer (am-1009). 


    Specifications:

    • Inside Diameter: 0.316 inch
    • Outside Diameter: 0.736 inch
    • Overall Thickness: 0.078 inch
    • Dynamic Load Capacity: 700 Newtons (157 lbs)
    • Static Load Capacity: 1100 Newtons (247 lbs)
    • Maximum speed: 15,000 rpm
    • Weight: 0.01 pounds

    8 mm ID 22 mm OD Shielded Bearing (608ZZ)

    #am-4456
    $5.00
    (35 In stock)

    This is an 8 mm round bore bearing that is unflanged. The Shielded Ball Bearing is a great way to make things spin fast!

     

    Specifications

    • Bore: 8 mm Round
    • Flange: Unflanged
    • Material: Steel
    • Outside Diameter: 22 mm
    • Seal Type: Shielded
    • Style: Radial
    • Weight: 0.025 lbs
    • Width: 7 mm

    10 mm ID 26 mm OD Shielded Bearing (6000ZZ)

    #am-4468
    $4.25

    Product Overview

     

    This is a 10 mm round bore bearing that is unflanged. The Shielded Ball Bearing is a great way to make things spin fast!

     

    Specifications

     

    • Bore: 10 mm Round
    • Flange: Unflanged
    • Material: Steel
    • Outside Diameter: 26 mm
    • Seal Type: Shielded
    • Style: Radial
    • Weight: 0.04 lbs
    • Width: 8 mm

    1/2 in. ID 1 3/8in. OD Shielded Bearing (1621ZZ)

    #am-4466
    $8.00

    This is a 1/2 in. round bore bearing that is unflanged. The Shielded Ball Bearing is a great way to make things spin fast!

     

     

    Specifications

    • Bore: 0.5 in. Round
    • Flange: Unflanged
    • Material: Steel
    • Outside Diameter: 1.375 in.
    • Seal Type: Shielded
    • Style: Radial
    • Weight: 0.105 lbs
    • Width: 0.438 in.

    Climber in a Box Bearing Kits - 1 to 1.5 extrusion

    #am-4661
    $79.00
    (0 In stock)

    This kit is made of the components that facilitate smooth linear movement on the Climber in a Box. The Bearing Kits are made to allow a piece of Box Extrusion to telescopically slide in and out of another, a large piece of Box Extrusion. These kits either come with brackets that work with a 1 in. and 1.5 in. box tube, or a 1.5 in. and 2 in. box tube. 

     

    Items Included in am-4661:

     

    • 2 - 1.5 in. Tube Bearing Plate (am-4644) 
    • 4 - 0.192 in. ID 0.375 in. OD 1.5 in. Long Aluminum Spacer (am-1599)
    • 2 - 0.375 in. ID 0.5 in. OD 0.688 in. Long Plastic Spacer (am-1611)
    • 2 - 0.192 in. ID 0.3125 in. OD 1.5 in. Long Aluminum Spacer (am-1503)
    • 2 - Insider Slider Block (am-4629)
    • 2 - 1 x 1 in. Clamp Slider Block (am-4630)
    • 2 - 0.192 in. ID 5/16 in. OD 0.875 in. Long Male to Female Aluminum Standoff (am-1613)
    • 2 - 0.625 in. Wide 30 in. Long Constant Force Spring (am-4657)
    • 8 - 8 mm Flat Washer (am-1009)
    • 4 - 8 mm ID 22 mm OD Shielded Bearing (608ZZ) (am-4456)
    • 8 - 10-32 Nylock Jam Nut (am-1063)
    • 6 - 10-32 Jam Nut (am-1612)
    • 6 - 10-32 x 2 in. Socket Head Cap Screw (am-1049)
    • 8 - 10-32 x 3/8 in. Button Head Cap Screw with Nylon Patch (am-1588)
    • 6 - #10 Flat Washer (am-1026)
    • 4 - 10-32 x 0.5 in. Hex Drive Flat Head Cap Screw with Nylon Patch (am-1505)

     

    Items Included in am-4662:

     

    • 2 - 2 in. Tube Bearing Plate (am-4645)
    • 4 - 0.192 in. ID 0.375 in. OD 2 in. Long Aluminum Spacer (am-1600)
    • 2 - 0.33 in. ID 0.47 in. OD 1.18 in. Long Plastic Spacer (am-1610)
    • 2 - 0.192 in. ID 0.3125 in. OD 2 in. Long Aluminum Spacer (am-1582)
    • 2 - Insider Slider Block (am-4629)
    • 2 - 1.5 x 1.5 in. Clamp Slider Block (am-4631)
    • 2 - 0.625 in. Wide 30 in. Long Constant Force Spring (am-4657)
    • 8 - 8 mm Flat Washer (am-1009)
    • 4 - 8 mm ID 22 mm OD Shielded Bearing (608ZZ) (am-4456)
    • 12 - 10-32 Nylock Jam Nut (am-1063)
    • 6 - 10-32 Jam Nut (am-1612)
    • 6 - 10-32 x 2.5 in. Socket Head Cap Screw (am-1024)
    • 8 - 10-32 x 3/8 in. Button Head Cap Screw with Nylon Patch (am-1588)
    • 6 - #10 Flat Washer (am-1026)
    • 4 - 10-32 x 0.5 in. Hex Drive Flat Head Cap Screw with Nylon Patch (am-1505)

     

     

     

    Documents

     

    Layout Print(s)

    am-4661 1.5in to 1.0in Tubing Bearing Kit.pdf

    am-4662 2.0in to 1.5in Climber in a Box Bearing Assembly.pdf

    CAD File(s)

    am-4661 1.5in to 1.0in Tubing Bearing Kit.STEP

    am-4662 2.0in to 1.5in Climber in a Box Bearing Assembly.STEP

    West Coast Drive Style Bearing Block Kit

    #am-4576
    $40.00
    (25 In stock)

    A West Coast style drivetrain can be finicky to create without precision machining capabilities. This Bearing Block Kit makes it much more accessible for teams to create high performance West Coast Drive style platforms with limited fabrication resources. Simply drill a clearance hole for a shaft to pass through your drive rail, pull your chain or belt tight, and clamp it down with the included hardware. Featuring machined pockets to capture 10-32 Nylock Nuts, these blocks can be used and reused without worrying about damaging threads upon installation. Because each block is the same part, you can keep the screw heads pointing to the outside of your robot for easy maintenance. 

     

    This unassembled kit ships with enough hardware to provide significant clamping pressure to help keep your powertrain components tensioned properly, and can withstand upwards of 1500lbs of force along the axis of the tube when properly installed. This means that for most FRC use cases, a team can install these without the need for tensioning devices to keep things aligned.

     

    The AndyMark West Coast Drive Bearing Block Kit is designed to be used with flanged ball bearings with a 1.125" outer race, such as our FR8ZZ-HexHD Bearing.

     

    Wheel Example

     

    The AndyMark West Coast Drive Bearing Block Kit also includes mounting geometry for components that utilize 2" and 1.875" bolt circles, such as motors, gearboxes, sprockets, hubs and gears. This makes this product great for many uses outside of your drivetrain, such as a robust interface to make a rotary arm, or an easy-to-use mounting interface for motors to power your mechanisms. The bearing plate is also 2" wide, making it perfect to keep two 20DP gears (of which the total teeth add up to 80,) meshed together.

     

    Sprocket Example Gearbox and Gears Example

    Items Included

    • 2 - WCD Bearing Block (am-4560)
    • 4 - 10-32 Nylock Nut (am-1042)
    • 4 - 10-32 x 1.5in Socket Head Cap Screw (am-1014)

    Specifications

    • Block Height: 0.45 in.
    • Block Length: 2.88 in.
    • Block Material: Aluminum
    • Block Width: 2.00 in.
    • Weight: 0.33 lbs

     

    Documents

    Layout Print(s)

    am-4576 WCD Bearing Block Kit.pdf

    am-4560 WCD 1.125 Bearing Block REV 2.pdf

    CAD File(s)

    am-4576 WCD Bearing Block Kit.STEP

    am-4560 2x1 WCD 1.125 Bearing Block REV2.STEP

    1/2 in. Hex ID Sealed Bearing (R82RS-Hex)

    #am-4703
    $12.00
    (12 In stock)

    This is a 1/2 in. hex bore bearing that is shielded. This Ball Bearing is a great way to make things spin fast!

    3/8 (0.375) in. Hex ID Sealed Bearing (R62RS-Hex)

    #am-4702
    $11.00
    (0 In stock)

    This is a 3/8 in. hex bore bearing that is shielded. This Ball Bearing is a great way to make things spin fast!

    1/4 in. ID 5/8 in. OD Shielded Bearing (R4ZZ)

    #am-4460
    $6.00
    (0 In stock)

    This is a 1/4 in. round bore bearing that is unflanged. The Shielded Ball Bearing is a great way to make things spin fast!

    1/4 in. ID 5/8 in. OD Shielded Flanged Bearing (FR4ZZ)

    #am-4461
    $7.50
    (0 In stock)

    This is a 1/4 in. round bore bearing that is flanged. The Shielded Ball Bearing is a great way to make things spin fast!

    Compact Elevator Bearing Kits (2 Stage Kit)

    #am-4870_8
    $295.00
    (4 In stock)

    The AndyMark Compact Elevator system is our next generation line of products to help FIRST Robotics Competition teams create high quality, reliable and robust linear motion mechanisms, such as an elevator or extension arm. The core of this system are the Bearing Kits, which are designed to be easily integrated into your robot design, and provide smooth rolling motion for your linear mechanisms. The primary load direction is supported by high strength 13mm Cam Follower needle bearings installed within machined aluminum blocks for a compact but robust bearing solution. The secondary load (or lateral loads, in a traditional FRC elevator,) is supported by 695ZZ ball bearings to keep your linear mechanisms moving and aligned. The 6061-T6 aluminum blocks have thoughtfully designed features integrated into them, including alignment grooves to help locate and support them along box tubes, as well as nut pockets machined in to support the M5 nylock nuts that retain the Cam Follower bearings.

     

    These bearing kits are designed to accommodate up to .125" wall 1x1 and 2x1 Aluminum Box Tubing. Available in single corner bearing kits, 4 packs for 1 stage mechanisms and 8 packs for 2 stage mechanisms.