Bearings & Bushings | Studica Canada - Robotics, Automation Technology for Education and Industry

Acetal Bearings pkg of 2

#38008

$13.82

Acetal Bearings provide extra support when building mechanisms interact with heavy-duty loads.

Quantity: pkg of 2
Material: Molded acetal
Nominal Size: 22 mm diameter x 9.25 mm

Ball Bearing, 8 mm x 19 mm x 6 mm Flanged

#am-0931

$6.92

(In stock)

Product Overview:

This is the Ball Bearing used to hold the Output Shaft of the CIM-Sim Gearbox.

Specifications:

Weight: 0.02 Lb
Inside Diameter: 8mm
Outside Diameter: 19mm
Overall Thickness: 6mm
Flange Diameter: 22mm
Flange Thickness: 1.5mm

This nub can be used to support the end of a 6mm D shaft, and be bolted to an S3 rail, a Ninja sprocket, pulley or wheel. With this you could create an idler sprocket, free spinning wheel or wheels on dead axles. This Nub also works as a bearing mount for a spinning axle.

Specifications:

Length: 0.63 in. (16 mm)
Height: 0.63 in. (16 mm)
Depth: 0.394 in.
Material: 6061-T6 Aluminum
Bore: 0.236 in. (6 mm)
Weight: 0.009 Pounds

Bearing, 1 1/4" id, 2 1/4"od, 1/2" thick

#am-2928

$10.76

(In stock)

Product Overview:

Ball bearing, 1-1/4 bore, with double shields, ABEC-1

This robust bearing is used on the Swerve & Steer Module.

Specifications:

Inside Diameter: 1.250 inch
Outside Diameter: 2.250 inches
Thickness: 0.500 inch
Material: Steel
Shields: yes, steel
Maximum Load: 12,000 pounds, dynamic
ABEC-1
Weight: 0.26

Bronze Bushing 6mm ID x 14mm OD (12 pack)

#76301-12

$31.94

(1157 In stock)

The Bronze Bushing 6mm ID x 14mm OD fits any of the channel and flat brackets having the common center hole pattern of 14mm. The inside diameter will fit any of the D-Shaft axels.

Material: bronze
Inside Diameter: 6 mm
Outside Diameter: 14 mm

Step File

Bronze Bushing 6mm ID x 8mm OD (12 pack)

#76300-12

$9.71

(1422 In stock)

Step File

Bushing, Bronze, 5/16" id, 0.50" od, 0.50" long

#am-2698

$3.08

(In stock)

This is the bronze bushing (and spacer!) used in the Worm Gearbox (am-0917).

Specifications:

Weight: 0.013 pounds
Material: Bronze
Inside Diameter: 5/16"
Outside Diameter: 0.5"
Length: 0.5"

Flange Bearing 6mm ID, 14mm OD, 15mm Flange (12 pack)

#76302-12

$24.99

(1013 In stock)

The Flange Bearing 14mm OD fits any of the channel and flat brackets with the common hole pattern having a center hole of 14mm. The inside diameter will fit any of the D-Shaft axels.

Quantity: 1 or 12
Material: AISI440C stainless steel
Sealed Type: ZZ metal shields
Precision: ABEC-3
Clearance: C0
Lubrication:Kyodo SRL Grease
ID (inner diameter)/Bore:6 mm
OD (outer diameter): 14 mm
OD of Flanged Size: 15 mm
Width: 5 mm
Thickness of Flange: 1 mm
Step File

FR6ZZL-hex Bearing

#am-0692

$9.23

(In stock)

3/8" Hex Bore, Shielded, Flanged Ball Bearing with Large (1.125") Outside Diameter

Specifications:

inside diameter: 0.375-0.376 inch hex bore
outside diameter: 1.125 inch
overall thickness: 0.312 inch
flange thickness: 0.055 inch
Weight: 0.056 pounds

Hubs Bearing Bore

#am-4117

$16.61

(0 In stock)

Each hub now has a "flower" pattern that fits and keys into the 42T 5mm HTD Pulley.

Large Bearing Plate for 2x1 Elevator

#am-3794

$10.76

(In stock)

The main structural component of the Elevator Bearing Kit.

Self-Lubricated Bearing .25 id x .25" long

#am-0603

$1.54

(In stock)

This self-lubricated bearing is used as bushings for the Rubber Rollers on the 6" Mecanum SR Wheels and 8" Mecanum HD Wheels.

Specifications:

Structure material: steel
Lubrication material: TPFE, located on the inside diameter
Weight: 0.002 pounds
Length: 0.25"
Inner Diameter: 0.25"
Outer Diameter: 0.315"

Small Bearing Plate for 2x1 Elevator

#am-3793

$6.15

(In stock)

This bracket is a main structural component of the 2x1 Single Stage Elevator Bearing Kit (am-3779). This plate mounts to a carriage and a Large Bearing Plate to hold bearings, translating the load from the carriage to the uprights in a lift system.

Specifications:

Material: 5052 Aluminum
Material Thickness: 0.125 in.
Weight: 0.06 Pounds

Tetrix Max Bronze Bushing 4.7mm(ID) x 4mm(L)

#41792

$27.71

These 4 mm long bronze bushings are handy for tighter space requirements.

Tetrix Max Bronze Bushings 4.7mm(ID) x 11mm(L) pkg of 12

#39091

$26.60

TETRIX MAX Bronze Bushings are greased to reduce friction.

Quantity: pkg of 12
Material: SAE 841 Bronze

Tetrix Prime 6 mm Plastic Bushing Spacer

#41665

$9.03

These plastic spacer/bushings are used in conjunction with 6 mm axles to keep your mechanisms and wheels running smoothly. Can also be used as a 2 mm spacer between metal surfaces.