Arduino Education Starter Kit

This updated version of the AndyMark 775 RedLine Motor is an even faster and more powerful version of this popular 775-class motor platform. With a power rating of up to 363W, this motor is capable of delivering even more immense power in the same small lightweight package over the previous version. This ball-bearing supported, air cooled motor is best used in high-speed applications where the motor will not be stalled for long periods such as shooters, conveyors, and intake mechanisms. With sufficient care and attention to your application's traction limit, this motor can be effective in FRC drive applications as well.

This variation of the RedLine comes with a 12 tooth, 32 DP pinion already pressed on allowing this motor to be installed into EVO Slim 4 RedLine, EVO Shifter 4 RedLine and DeCIMate gearboxes. Not only does this take the risk of damaging the motor during pinion installation out of your hands, it also means that this counts as a COTS part in FRC, and bringing these as spares to your competition won't count against your weight allowance for 2019. 

Product Usage:
Motors need air flow to keep cool. A hot motor won't last nearly as long, or deliver the power it once did new. To keep a RedLine cool and in great shape, use a 775 Vent Plate Spacer, am-3650 when mounting to a custom gearbox. All of our gearboxes that use this motor have vent plate spacers included with your purchase or include sufficient venting machined in.

Useful Additional Parts:

• RedLine Encoder Kit, am-3773
• 12 Tooth 32 DP Pinion, am-3657
• M4 x 0.7 10 mm Mounting Screw, am-1264
• Vent Plate for keeping this motor cool and functional - 775 Vent Plate Spacer, am-3650
• Fantastic Gearbox Pairing Options:
  • 57 Sport Gearboxes
  • DeCIMate Gearbox
  • EVO Slim for RedLine
  • EVO Shifter for RedLine

Motor has the following information laser etched on the flux ring:
Manufacturer Part number: DF-30F-2003 
Logo: AndyMark Logo
AndyMark Part Number: am-3775a
Voltage: 12VDC
Date Code: YYWWD

Specifications

• Bolt Pattern: 2 M4x0.7 Holes on a 29 mm diameter bolt circle
• Diameter: 1.744 in.
• Diametral Pitch: 32
• Face Width: 0.625 in.
• Free Speed: 21020 RPM
• Gear Length: 0.755 in.
• Gear Material: 1117 Steel
• Gear Weight: 0.014 lbs
• Length: 3.826 in.
• Maximum Power: 380 Watts (+/- 10%)
• No Load Current: 3.8 AMPs
• No Load Free Speed : 21020 RPM (+/- 10%)
• No Load RPM: 21020 RPM (+/- 10%)
• Output Shaft Diameter: 5 mm
• Output Shaft Length: 0.346 in.
• Pitch Diameter: 0.375 in.
• Pressure Angle: 20 Degrees
• Stall Current: 130 AMPs
• Stall Torque: 0.7 N-m (6.2 in-lbs) (+/- 10%)
• Teeth: 12
• Voltage: 12 Volts DC
• Weight: 0.819 lbs

Documents

CAD File(s)

am-3775a_12T 775 RedLine with 12T Pinion.STEP

Layout Print(s)

am-3775a_12T 775a RedLine with 12T Pinion.PDF

The CIM motor is a tried and true FIRST Robotics Competition workhorse motor. This brushed DC motor is 2.5 inches in diameter and kicks out 337 watts of power.

Pinion Options:

The CIM motor shaft is 0.313 in. (8 mm) in diameter and 1.25 inches long. It features a 2 mm wide machine key slot allowing installation of any number of custom or off the shelf pinions such as those included with all of our CIM based gearboxes. Other options include a pre-attached 16 tooth pinion making the CIM ready to mate to a CIM Sport planetary gearbox or a pre-attached 15 tooth pinion preparing the CIM for an EVO Gearbox. Use either of these two options if you are planning on using either the CIM Sport or an EVO gearbox and don't want to install the press fit pinion yourself. All of our other CIM based gearboxes use a slip fit pinion & machine key and are easy for the end user to install. 

Compatible Components:

• Long CIM Motor Key - 2x2x14 mm Machine Key (am-0032)
• CIM Motor Key - 2x2x10 mm Machine Key, steel (am-1121)
• Retaining Ring for CIM Shaft - Retaining Clip, 8 mm id (am-0033)

Motor Etching

• Logo: AndyMark Logo
• Voltage and Name: 12VDC 2.5" CIM MOTOR
• CCL part number: PM25R-45F-1003
• Manufacturing date: MMDDYY

Specifications

• Bolt Pattern: 2 #10-32 Holes on a 2 in. diameter bolt circle
• Duty Cycle: Intermittent
• Free Current: 2.7 AMPs
• Free Speed: 5310 RPM
• Maximum Power: 337 Watts
• Output Shaft Diameter: 0.313 in. (8mm)
• Output Shaft Length: 1.245 in.
• Stall Current: 133 AMPs
• Stall Torque: 343.4 in-oz
• Voltage: 12 Volts DC
• Weight: 2.8 lbs

Documents

CAD File(s)

am-0255 2.5inch CIM Motor.STEP

Layout Print(s)

am-0255 CIM Motor Layout.pdf

Guide(s)

CIM-motor-curve-am-0255.pdf

Don't see what you need?

See_all_our_guides,_drawings_and_CAD_files_here

A proven 550 size motor. This motor is similar to our past 9015 motor (am-0912) but the shaft is smooth and shorter We recommend using this motor in the 57 Sport Gearbox. The mounting screws are M3 size.

Specifications

• Diameter: 1.52 in
• Free Current: 1.4A
• Free Speed: 19300
• Hole Pattern: Qty. 2 M3
• Length: 2.24 in.
• Shaft Diameter: 0.125 in.
• Shaft Length: 0.3 in.
• Stall Current: 85A
• Stall Torque: 69.16 oz-in
• Voltage: 6-14.4 VDC
• Wattage: 200
• Weight: 7.7 oz

Documents

CAD File(s)

am-3830 BaneBot550Motor.STEP

This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.

Specifications:

• Inside diameter: 0.500-0.502 inch hex bore
• Outside diameter: 1.125 inch
• Flange thickness: 0.062 inch
• Overall thickness: 0.312 inch
• Weight: 0.05 pound

NOTE: This product is not included in any Sales or Discounts.

This is for the Pneumatic Control Module (aka PCM) being used in the 2015 through 2021 FIRST Robotics Competition Kit of Parts.

For an overview of the 2020 Controls system, please see: https://wpilib.screenstepslive.com/s/currentCS/m/kop.

The Pneumatic Control Module (aka PCM) from Cross the Road Electronics provides an easy all-in-one interface for pneumatic components.

This is the ultimate step in our pneumatics packages. Plenty of extras for backup parts and multiple actuation. All while creating pressurized air in a safe, manageable manner for mobile robots.

The LEGO^® Education SPIKE^™ Prime Set is the go-to STEAM learning tool for grade 6-8 students. Combining colorful LEGO building elements, easy-to-use hardware, and an intuitive drag-and-drop coding language based on Scratch, SPIKE Prime continuously engages students through playful learning activities to think critically and solve complex problems, regardless of their learning level. From easy-entry projects to limitless creative design possibilities, including the option to explore text-based coding with Python, SPIKE Prime helps students learn the essential STEAM and 21st century skills needed to become the innovative minds of tomorrow... while having fun!

LEGO EDUCATION SPIKE PRIME

The LEGO^® Education BricQ Motion Prime Set engages students in grades 6-8 in the exploration of physical science within a sports context. BricQ Motion helps foster an understanding of forces, motion, and interactions by providing easy hands-on learning experiences without the need for technology.

• Printed building instructions and replacement elements are included for easy classroom management.
• With the new numbered foils, students can easily gather data on variables, angles, heights, and lengths to support their analysis and synthesis.
• Download the fact sheet

Inspire your secondary students to explore more advanced creations and continue to nurture their interest in STEAM learning with the LEGO^® Education SPIKE^™ Prime Expansion Set (45681). It comes with over 600 LEGO elements, including large wheels, gear racks, a Color Sensor and Large Motor, plus a unique Maker Plate for easy building with your choice of single board computing (SBC) devices. The set also combines with the SPIKE Prime Set (45678) and free SPIKE App to launch students and teachers into the exciting world of robotics competitions, with over 10 hours of curriculum-based, competition-ready learning.

Additional Features
LEGO^® Technic^™ and System elements in a fresh color palette, including 2 large wheels, gear racks, a Maker Plate for SBCs, Large Motor and Color Sensor. ​
The Maker Plate makes integrating your choice of single board computing devices fast and simple. ​

Combines with the LEGO^® Education SPIKE^™ Prime Set (45678) and free SPIKE App to give over 10 hours of curriculum-based, competition-ready learning. ​
Includes comprehensive online lesson plans and teacher support.