Close
Main Categories
    Filters
    Preferences
    Search

    42 Tooth Pulley

    This is the 42 tooth pulley used in the AM14U family of chassis. It works with all 5 mm pitch HTD timing belts. This pulley has a 1.875 in. bolt circle making it easy to attach to many of our motion components. It also has a locking pattern that is compatible with many of our wheels.

    This pulley comes as two identical halves that mesh with each other to create one pulley that is the correct width for a 15 mm timing belt.

    Need to have two 15 mm belts on one pulley? Add in the 15 mm wide, 42 Tooth Pulley Extension (am-2813) and you can run two belts in two different directions.

     

    Specifications

    • Belt Profile: 5 mm pitch HTD timing belt, 15 mm wide
    • Bolt Pattern: 0.2 in. diameter holes, evenly spaced on a 1.875 in. diameter bolt circle
    • Bore: 0.95 in., with bearing pocket of 1.124 in. diameter x 0.25 in. deep
    • Flange Diameter: 2.92 in.
    • Material: Black Polycarbonate
    • Outside Diameter: 2.575 in. (at outer tooth edge)
    • Pitch Diameter: 2.632 in.
    • Teeth: 42
    • Weight: 0.12 lbs
    • Width: 0.85 in. (both halves assembled together)
    MFR Part #: am-2234a
    $11.95
    Availability: In stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

    #am-2986
    $8.00
    (87 In stock)

    This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

    This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


    Specifications:

    • Inside diameter: 0.500-0.502 inch hex bore
    • Outside diameter: 1.125 inch
    • Flange thickness: 0.062 inch
    • Overall thickness: 0.312 inch
    • Weight: 0.05 pound

    3 in. Compliant Wheel, 1/2 Inch Hex, 40A Durometer, Orange

    #am-3945_orange
    $11.00
    (0 In stock)

    You asked, we listened! These 3" diameter HD (heavy-duty) solid-core Compliant Wheels are intended for manipulating objects where you need a little 'give' in your intake system. These wheels deform out of the way to allow rigid objects to be manipulated easily. This makes for high-performance intakes and internal conveyors. These wheels do not require the use of expensive hubs to be driven, thanks to their integrated high strength polycarbonate hubs - which are made from the same mold that creates our Hex Molded Spacers.



    Different durometer ratings give each wheel unique characteristics. Green compliant wheels (35A durometer) are the softest and most compliant around objects, while maroon (45A) blue (50A) and black (60A) wheels are increasingly firm.

     

    Specifications

     

    • Bore: 0.375 in. Hex, 0.5 in. Hex, 5 mm Hex
    • Color: Green, Black, Blue, Black
    • Core Material: Polycarbonate
    • Diameter: 3 in.
    • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
    • Tread Material: TPU
    • Weight: 0.12 lbs
    • Overall Width: 1 in.

     

    Documents

     

    Layout Print(s)

    am-3946 3IN 375Hex Compliant Wheel REV3.PDF

    am-3945 3IN 500Hex Compliant Wheel REV3.PDF

    am-4537 3in 5mm Hex Molded Compliant Wheel.PDF

    CAD File(s)

    am-3946 3IN 375Hex Compliant Wheel REV 3.STEP

    am-3945 3IN 500Hex Compliant Wheel REV 3.STEP

    am-4537 3in 5mm Hex Molded Compliant Wheel.STEP

    Andymark Hubs 1/2 in. Hex

    #am-4124
    $12.00
    (In stock)

    Each hub now has a "flower" pattern that fits and keys into our 42T 5 mm HTD Pulley, which means you are no longer constrained to our legacy 500EX Hex Hub for compatibility with this pulley. Every hub still maintains a closed-profile hole for maximum strength. Every shaft hub has been designed with bearing bosses on both sides that have been sized appropriately for the mating bearings that would pair with the bore through the hub, which means you can run each hub right against a bearing with no need for extra spacers. All of these hubs are also made from 7075-T6 aluminum, which is much stronger than the previously used 6061-T6, 6005, and 6105 alloys from our older designs. Where possible, the shoulder on shaft hubs was reduced to 7/8" in diameter for an easier fit with our molded plastic wheels, while still maintaining a precise 1.125" diameter boss for locating in wheels, sprockets, gears, and more. 

     

    The holes are evenly spaced on a 1.875 in. circle and 0.201 inches in diameter. That's a perfect size for #10 bolts!

     

    Learn how to attach these hubs to AndyMark wheels by watching this video!

    SB-50A Anderson Powerpole Connector with Contacts

    #am-0546
    $7.00
    (In stock)

    Anderson Power Products Connector with 2 contacts. 

    Specifications:

    • Material (APP Connector): Red Plastic
    • Weight: 0.060
    • Mounting holes: 0.15" diameter, 3/4" apart

    Included Hardware:

    • One - SB-50A red plastic connector
    • Two - Anderson Power Products crimp contacts (sized for 6 gauge wire)

    0.50 in. Hex and Keyed Shaft Coupling

    #AM-1560
    $25.00
    (15 In stock)

    Whether you have shafts that are too short or shafts of different types, this coupling will solve every component connection issue you've had! Need to combine multiple hex shafts, multiple 1/2-inch keyed shafts, or convert between hex and keyed? This coupling solves all at a better price than anyone else can offer!

    Shaft Compatability

    This coupling has geometry to capture 0.50-inch hex shafts with an inside hex of 0.51 to 0.52 inches as well as 0.5 inch keyed shafts with a 1/8th inch keyway with a keyway width of 0.128 inches to 0.131 inches.

    Sushi Roller Intake Wheels - 1/2 in. Hex, 40a (Orange)

    #am-4541_orange
    $6.00

    The Sushi Roller Intake Wheels are an excellent choice for robot intakes, internal conveyors, feeder mechanisms, or anywhere you need a durable, compact and grippy roller. These rollers are made with a robust polycarbonate hex bore hub, so no external hub is necessary - just slide them onto a hex shaft, constrain them axially and you are good to go. Available in a range of durometers for a wide variety of applications, these cute little rollers are great for getting a grip on things!

     

    Specifications

    • Bore: 0.5 in. Hex, 5 mm Hex, 0.375 in. Hex
    • Core Material: Polycarbonate
    • Diameter: 1 in.
    • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
    • Tread Material: TPU
    • Weight: 0.022 lbs
    • Width: 1 in.