Close
Main Categories
    Filters
    Preferences
    Search

    3/8 in. 7075 Aluminum Hex Shaft Stock - 6 Foot Length

    This 7075 T6 Aluminum shaft stock is 0.375 in. from flat to flat. This stock may be a tight fit in some of our 3/8 in. hex products.

     

    Specifications

    • Length: You specify
    • Material: 7075-T6 Aluminum
    • Weight: 0.25 lbs/ft
    • Width: 0.375 in. Hex
    MFR Part #: am-3807-6
    $37.00
    Availability: In stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    #10-32 x 0.625" SHCS - Min 25

    #am-1120
    $0.47
    (In stock)

    Specifications:

     

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 10-32
    • Length: 5/8 inch
    • Head: Socket Head Cap Screw
    • Yellow Nylon Thread Lock Patch

    10-32 Nylock Nut

    #am-1042
    $0.08
    (In stock)

    This item can only be purchased in multiples of 25

     

    Specifications: 

    • Material: Steel
    • Coating: Zinc Plated
    • Thread: #10-32
    • Thickness: 0.249"
    • Thread: Fine
    • Thread Size: 32
    • Type: Nylon Insert Lock Nut
    • Wrench Size: 3/8"

    2" Compliant Wheel, 3/8 inch Hex, 50 Durometer Blue

    #am-3571_blue
    $8.00
    (In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

     

    The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

     

    Compliant Wheel Sizing

     

    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
    • Diameter: 2 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
    • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU
    • Maximum RPM: 6000 - 9000
    • Weight: 0.035 lb.
    • Width: 0.5 in.

     

    Documents

    Layout Print(s)

    am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

    am-3462 2IN 500Hex Compliant Wheel REV3.PDF

    am-3572 2IN 8mm Compliant Wheel REV4.PDF

    CAD File(s)

    am-3571 2IN 375Hex Compliant Wheel REV2.STEP

    am-3572 2IN 8mm Compliant Wheel REV2.STEP

    am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

    Additional File(s)

    2 inch Compliant Wheel Expansion.pdf

     

    Retainer Clip, 8mm id

    #am-0033
    $0.38
    (In stock)

    This retainer clip is used to hold objects (such as gears) in place on shafts. 

    Example: This product can be used to hold a gear onto a CIM motor shaft. 

    Specification: 

    • Material: Steel
    • Inner Diameter: 8mm
    • Outer Diameter: 15mm
    • Weight: Less than 0.001 lbs

    1/2 in. ID Black Nylon Washer

    #am-1001
    $0.49
    (In stock)

    Nylon washer with a 1/2 in. inside diameter.

     

    This item can only be purchased in multiples of 10

     

     

    Specifications

    • Inside Diameter: 0.505 in.
    • Material: Nylon
    • Outside Diameter: 0.750 in.
    • Thickness: 0.062 in.

    Sushi Roller Intake Wheels, 1/2 in. Hex, 35A (Green)

    #am-4541_green
    $6.00

    The Sushi Roller Intake Wheels are an excellent choice for robot intakes, internal conveyors, feeder mechanisms, or anywhere you need a durable, compact and grippy roller. These rollers are made with a robust polycarbonate hex bore hub, so no external hub is necessary - just slide them onto a hex shaft, constrain them axially and you are good to go. Available in a range of durometers for a wide variety of applications, these cute little rollers are great for getting a grip on things!

     

    Specifications

    • Bore: 0.5 in. Hex, 5 mm Hex, 0.375 in. Hex
    • Core Material: Polycarbonate
    • Diameter: 1 in.
    • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
    • Tread Material: TPU
    • Weight: 0.022 lbs
    • Width: 1 in.