Close
Menu
Main Categories
    (0) Quote
    You have no items in your shopping cart.
    (0) Items
    You have no items in your shopping cart.
    Menu
    Shopping cart
    Filters
    Preferences
    Search
    Prev240mm Square Beam
    Next288mm Square Beam

    288mm Flat Beam (2 pack)

    Be the first to review this product

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 288mm
    • Step File

     

    .

    MFR Part #: 76043-2
    $8.32
    Availability: 973 in stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

    Also Purchased

    Picture of 12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    #am-2590
    $10.00
    (20 In stock)

    This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches. 

    Specifications:

    • Weight: pounds
    • Length: Approximately 24 inches
    • Connector Type: Anderson PowerPole PP45
    • Gauge: 12 bonded
    Picture of Anderson PowerPole to JST VH

    Anderson PowerPole to JST VH

    #am-3732
    $5.39
    (In stock)

    Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub.

    Connections:

    • JST VH
    • Anderson Power Pole
    Picture of Intake Hub Kit

    Intake Hub Kit

    #70210
    $10.95
    (1610 In stock)

    The Intake Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Used with the Silicone Rubber Tubing #76410


    Specifications:

    • Main piece
      • hex width: 20.78mm*10.0mm thick
      • 6*M6 tapped holes
      • 1*M4 tappped hole for M4 set screw
      • 6.0mm Diameter D Hole
      • Material AL6061-T6
      • Φ7.5mm*14.0mm
    • Pins
      • 6PCS in a pack
      • M6*4.0mm thread
      • Material SS303
    • Step file
    Picture of Servo Arm Extended

    Servo Arm Extended

    #76150
    $8.32
    (In stock)

    The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

     

    Specifcations:

    • Spline: 25 Tooth, 3.8mm deep
    • Length: 56mm
    • Width: 14mm
    • Height: 7.8mm
    • Material: 6061-T6 Aluminum
    • Step File
    Picture of Motor Mount Clamp Kit

    Motor Mount Clamp Kit

    #76141
    $15.27
    (1741 In stock)

    Use the Motor Mount Clamp kit when fastening motors on body and attaching kit to channel and other structure.

     

     

    Picture of Servo Standard Front

    Servo Standard Front

    #76144
    $6.24
    (1218 In stock)

    The Servo Standard Front Mounting Bracket is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Picture of XT30 (MH-FC) to Tamiya (MH-FC) Cable

    XT30 (MH-FC) to Tamiya (MH-FC) Cable

    #70179
    $5.54
    Picture of 30 Tooth Bevel Gear x 1-to-1 Set (2 pack)

    30 Tooth Bevel Gear x 1-to-1 Set (2 pack)

    #76219-2
    $31.99
    (622 In stock)

    Used to change motor to axle motion 90 degrees. This can be used in between the U-channel.

    Specifications:

    • Material: Steel
    • Number of teeth: 30
    • Set of 2 for 1-1 drives
    • Step File

    Picture of #25 Connecting Link for Roller Chain

    #25 Connecting Link for Roller Chain

    #am-0371
    $1.54
    (In stock)

    #25 Connecting Link (Master Link) 

    Specifications:

    • Material: Steel
    • Style: Roller Chain - Spring Clip
    • Type: Connecting Link
    • Size: #25
    • Pitch: 0.250 inch
    • Weight: 0.01 lbs
    Picture of #25 Half Link for Roller Chain

    #25 Half Link for Roller Chain

    #am-0682
    $3.08
    (In stock)

    #25 Half Link. Also known as #25 Offset Link. 

    Specifications:

    • Material: Steel
    • Style: Roller Chain with interted pin
    • Type: Half Link
    • Size: #25
    • Pitch: 0.25 inch
    • Weight: 0.01 lbs
    Customers who bought this item also bought
    Picture of 12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    12 AWG Bonded Cable PP45 Powerpole to Bare Wire

    #am-2590
    $10.00
    (20 In stock)

    This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches. 

    Specifications:

    • Weight: pounds
    • Length: Approximately 24 inches
    • Connector Type: Anderson PowerPole PP45
    • Gauge: 12 bonded
    Picture of Anderson PowerPole to JST VH

    Anderson PowerPole to JST VH

    #am-3732
    $5.39
    (In stock)

    Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub.

    Connections:

    • JST VH
    • Anderson Power Pole
    Picture of Intake Hub Kit

    Intake Hub Kit

    #70210
    $10.95
    (1610 In stock)

    The Intake Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Used with the Silicone Rubber Tubing #76410


    Specifications:

    • Main piece
      • hex width: 20.78mm*10.0mm thick
      • 6*M6 tapped holes
      • 1*M4 tappped hole for M4 set screw
      • 6.0mm Diameter D Hole
      • Material AL6061-T6
      • Φ7.5mm*14.0mm
    • Pins
      • 6PCS in a pack
      • M6*4.0mm thread
      • Material SS303
    • Step file
    Picture of Servo Arm Extended

    Servo Arm Extended

    #76150
    $8.32
    (In stock)

    The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

     

    Specifcations:

    • Spline: 25 Tooth, 3.8mm deep
    • Length: 56mm
    • Width: 14mm
    • Height: 7.8mm
    • Material: 6061-T6 Aluminum
    • Step File
    Picture of Motor Mount Clamp Kit

    Motor Mount Clamp Kit

    #76141
    $15.27
    (1741 In stock)

    Use the Motor Mount Clamp kit when fastening motors on body and attaching kit to channel and other structure.

     

     

    Picture of Servo Standard Front

    Servo Standard Front

    #76144
    $6.24
    (1218 In stock)

    The Servo Standard Front Mounting Bracket is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Related products
    Picture of WorldSkills Mobile Robotics Collection Shanghai 2022

    WorldSkills Mobile Robotics Collection Shanghai 2022

    #70201
    $3888.04
    (In stock)

    The WorldSkills Mobile Robotics Collection – Shanghai 2022 by Studica is the authorized collection for the WorldSkills Mobile Robotics Competition. Featuring the Studica VMX Robotics Controller for WorldSkills, the Titan Quad Motor Controller and Servo Power Block. This comprehensive Collection also includes electronics, accessories, motors, servos, mounts, U-Channel, mounting plates, flat brackets, irregular brackets, and flat beams. You'll also find gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. Includes Everything You Need (Over 1500 components).

    Download brochure and BOM

    WorldSkills Mobile Robotics Junior Collection 2021

    WorldSkills Mobile Robotics Junior Collection

    #70301
    $3262.95
    (0 In stock)

    The WorldSkills Mobile Robotics Junior Collection by Studica is the authorized collection for the WorldSkills Asia Mobile Robotics Junior Competition. This comprehensive Collection includes over 1,400 items including controller, electronics, motors, structure, gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs.

    Picture of 432mm Flat Beam

    432mm Flat Beam

    #76040
    $6.93
    (791 In stock)

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 432mm
    • Step File

     

    Picture of 384mm Flat Beam

    384mm Flat Beam

    #76041
    $5.54
    (737 In stock)

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 384mm
    • Step File

     

    Picture of 336mm Flat Beam

    336mm Flat Beam

    #76042
    $4.85
    (788 In stock)

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 336mm
    • Step File

     

    Picture of 240mm Flat Beam

    240mm Flat Beam

    #76044
    $4.01
    (817 In stock)

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 240mm
    • Step File

    r.

    Picture of 192mm Flat Beam

    192mm Flat Beam

    #76045
    $3.32
    (720 In stock)

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 192mm
    • Step File
    Picture of 144mm Flat Beam

    144mm Flat Beam

    #76046
    $3.04
    (1828 In stock)

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 144mm
    • Step File

     

    Picture of 96mm Flat Beam (2 pack)

    96mm Flat Beam (2 pack)

    #76047-2
    $5.54
    (1803 In stock)

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 96mm
    • Step File

     

    Picture of 48mm Flat Beam

    48mm Flat Beam

    #76048
    $2.07
    (1019 In stock)

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 48mm
    • Step File
    Information
    Customer service
    My account
    Contact Info
    Copyright © 2024 Studica Limited. All rights reserved.