Close
Main Categories
    Filters
    Preferences
    Search

    250mm Linear Slide Set

    The 250mm Rail and Block Set will provide precision and low friction sliding for all your robot applications.

    Specifications:

    • 9mm wide x 250mm Stainless Steel Guide Rail
    • Ball Bearing Block
    • Step File 
    MFR Part #: 72064
    $31.94
    Availability: 240 in stock

    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

    Customers who bought this item also bought

    15T 32DP 0.312 Bore Steel Gear

    #am-3482
    $13.84
    (16 In stock)

    This gear is used as the input pinion gear for the EVO Shifter. This gear is a tight press fit onto a CIM gear, and requires at minimum a 3-ton arbor press to install. If a CIM motor with this gear pre-installed interests you, check out am-0255_15T. 

    Specifications:

    • Tooth Count: 15
    • Diametral Pitch: 32
    • Pressure Angle: 20
    • Pitch Diameter: 0.469"
    • Face Width: 0.531"
    • Thickness: 0.75"
    • Material: 1117 Steel
    • Bore: 0.312" Round (7.92mm) This is a press fit onto the CIM Motor (am-0255)
    • Weight: 0.019 Lbs

    Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

    #am-2986
    $8.00
    (87 In stock)

    This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

    This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


    Specifications:

    • Inside diameter: 0.500-0.502 inch hex bore
    • Outside diameter: 1.125 inch
    • Flange thickness: 0.062 inch
    • Overall thickness: 0.312 inch
    • Weight: 0.05 pound

    TETRIX MAX TorqueNADO Motor Gearbox 20:1

    #45424
    $17.25
    (19 In stock)

    These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.

    26 Tooth Bevel Gear (2 pack)

    #76224-2
    $20.82
    (503 In stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Number of teeth: 26
    • Step File

     

    NeveRest Classic 60 Gearmotor Anderson Powerpole 15A

    #am-3103
    $44.50
    (In stock)

    The NeveRest 60 is a gearmotor with an attached encoder. The output shaft geometry and the gearbox housing diameter is similar to what FTC teams are familiar with. The shaft is 6mm dia and the gearbox housing is 37mm in diameter 

    The power cable which feeds into the black encoder housing has two powerpole connectors already crimped to the end of the cable.

    FTC Legality: 


    According to the FIRST Tech Challenge Game Manual Part 1, Rule RE04 this is legal for the 2016-2017 FTC Game.

    Encoder Cable options: 


    Encoder cables are not included with this motor, and are sold separately. We have two options:

    1. am-2992 is a cable which has the white 4-pin connector for the encoder and also the black 4-pin connector for the HiTechnic and Modern Robotics motor controller.
    2. am-2993 is a cable which has the white 4-pin connector for the encoder on one end and 4 separate black connectors.

    Encoder: 


    There is an encoder mounted to the back side of this motor. It is a 7 pulse per revolution (ppr), hall effect encoder. Since the motor's gearbox has a 60:1 reduction, then the NeverRest 60 output shaft provides 420 ppr.



    Working with the Encoders:

     

    • https://ftc-tricks.com/dc-motors/
    • https://www.reddit.com/r/FTC/comments/474wks/help_the_different_motor_modes_run_using_encoders/
    • https://www.youtube.com/watch?v=d0liBxZCtrA

    Specifications: 
    Physical Specs:

    • Overall Length: 133.5mm (5.26 in)
    • Maximum Diameter: 37mm (1.46 in)
    • Output Shaft size: 6mm (0.24 in) with 0.5mm deep flat
    • Weight: 0.776 pounds
    • Mounting Holes: M3 tapped holes, qty. 6, on a 31mm bolt circle (3.5mm depth MAX, beyond this can damage plate and stop motor)
    • Electrical Connection Geometry: 6-pin connector for motor power and encoder contact
    • Gear Material: Steel
    • Body Material: Steel with plastic encoder housing
    • Lubrication: Included with gearbox
    • Shaft Hardness: 45-50 Rockwell C (https://en.wikipedia.org/wiki/Rockwell_scale)
    • Wire Gauge: 18 AWG

    Theoretical Performance Specs:

    • Gearbox Reduction: 60:1
    • Voltage: 12 volt DC
    • No Load Free Speed, at gearbox output shaft: 105 RPM
    • Gearbox Output Power: 14W
    • Stall Torque: 593 oz-in
    • Stall Current: 11.5A
    • Output counts per revolution of Output Shaft (cpr): 1680 Pulses

    Performance Specs, mounted to AndyMark dyno: Coming Soon

    • Max Speed (under load of dyno):
    • No Load Current (under load of dyno):
    • Stall Current:
    • Stall Torque:
    • Max Output Power:
    • Time to Failure at Stall:
    • Motor Case Temperature at Failure:

    400mm Linear Slide Set

    #72065
    $36.10
    (611 In stock)

    The 400mm Rail and Block Set will provide precision and low friction sliding for all your robot applications.

    Specifications:

    • 9mm wide x 400mm Stainless Steel Guide Rail
    • Ball Bearing Block