Close
Main Categories
    Filters
    Preferences
    Search

    1/8 NPT Male to 1/4 Tube, Elbow Meter-Out Flow Valve

    This is a pneumatic meter-out flow control valve. The port is a 1/8" NPT male thread, and 1/4" diameter tube can be pressed in to the push-to-connect fitting.
     

    Meter-out allows for the flow to be controlled in one direction, while the opposite flow is not restricted.

     

    Specifications

     

    • Hex Width: 7/16 in.
    • Material: Rotating thermoplastic (PBT) body, nickel-plated brass threads, stainless steel tube griping claws, and pre-applied Teflon thread sealant
    • Port(s): 1/8 in. NPT male with pre-applied Teflon thread sealant
    • Weight: 0.01 lbs
    MFR Part #: am-2897
    $14.00
    Availability: In stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    Pneumatic fitting, elbow, 1/4 inch tube, press-in, 1/8 inch NPT male

    #am-2039
    $3.85
    (53 In stock)

    This is a pneumatic push-to-connect male elbow fitting. The port is a 1/8" NPT male thread, and 1/4" diameter tube can be pressed in to the push-to-connect fitting. 

    Specifications:

    • Weight: 0.03 pound
    • Width: 1.05"
    • Height: 1.14"
    • Depth: 0.54"
    • Material: Brass with nickel plating, with plastic body material
    • Hex width: 1/2 inch
    • Ports: 1/8" NPT male with pre-applied PTFE thread sealant
    • Pressure range: 0-150 psi

    6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX

    #am-0805
    $5.50
    (256 In stock)

    This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

     

    Specifications

    • Gauge: 06 AWG
    • Hole Size For Stud: 0.25 in.
    • Material: Copper
    • Overall Length: 2.03 in.
    • Tongue Width: 0.48 in.
    • Weight: 0.01 lbs
    • Wire Strip Length: 1.18 in.

    Collar Clamp, 1/2 Hex Bore, 2 Pc with Flats

    #am-2871
    $12.68
    (12 In stock)

    This novel style of collar clamp is split into two pieces so that it can be attached without removing any shafts. The bore is a 1/2" hex. The flats on the perimeter allow for the collar clamp to be held in position or turned for better assembly control. 

    This clamp has been designed and fabricated by BaneBots, and proudly sold through AndyMark.

    Specifications:

    • Material: Aluminum
    • Bore: hex hole, 1/2 inch
    • Outside Diameter: 0.94 inch
    • Thickness: 0.375 inch
    • Width Across Flats: 7/8 inch
    • Weight: 0.020 pound
    • Clamping Screws: #6-32 x 1/2" long (qty. 2)

    Plastic spacers are included with this clamp, positioned between the two halves. These are to be removed before usage.

    2 x 1 x 0.063 Aluminum Box Extrusion, 6ft

    #am-3214-6
    $49.00
    (17 In stock)

    This sharp-cornered 6061-T6 aluminum extrusion is a robust and lightweight solution for custom robot frames and mechanism construction. 

    Specifications:

    • Length: 72" (+/- 1")
    • Wall Thickness: 0.062"
    • Exterior Corners: Sharp
    • Material: 6061-T6 Aluminum
    • Weight: 2.4 Pounds

    #35 In line Chain Tensioner

    #am-3914_35
    $23.00
    (7 In stock)

    This Inline Chain Tensioner for #35 series roller chain is perfect to adjust the desired tension in a long run of chain on mechanisms such as elevators and arms. This is ideal where there is at least a ~3" section of chain that never passes over a sprocket in a given mechanism. Pair this with two #35 Master Links and integrate this to your robot for an easy-to-use chain tension solution!

     

    The design of this product was inspired by Misumi's Chain Turnbuckles. This product has been improved to be compatible with imperial-sized wrenches.

     

    Specifications

    • Chain Size: #35

     

    Documents

    CAD File(s)

    am-3914_35 35 Chain Tensioner.STEP

    Layout Print(s)

    am-3914_35 #35 Chain Inline Tensioner.PDF

    6 Gauge 12 Inch Battery Cable - Stiff PVC Insulation

    #am-0009
    $26.50
    (10 In stock)

    Tip-to-tip length is approximately 12.6 inches.